Abstract:Effective corrosion inhibition of mild steel 1030 at 0.01 M NaCl concentration was achieved by the use of the nontoxic surfactant salt cetrimonium trans-4-hydroxy-cinnamate (CTA-4OHcinn). Polarization analysis on the steel samples immersed for 24 h in the control and CTA-4OHcinn-containing solutions shows the development of a passivation potential that is more obvious at higher inhibitor concentrations along with a maximum inhibition efficiency of 97.8%. Electrochemical impedance spectroscopy (EIS) pinpoints the effect of the inhibitor on the corroding regions of the metal surface, showing an increase in the local electric resistance and conversely a decrease in the local capacitance, which indicates that the charge transfer in the corroding regions is being hindered by a deposition process. This is consistent with scanning electron microscopy (SEM) images, showing the presence of a porous oxide matrix that fills localized corrosion sites on the metal surface after 24 h of immersion in a 0.01 M NaCl + 10 mM inhibitor solution. Additionally, SEM analysis also shows the formation of an organic film surrounding the defects that is able to shield chloride attack. As a result of diffusion of chloride from the defects below the protective film, filiform corrosion can be seen. Time-resolved impedance analysis over the first 120 min of immersion in the control and inhibitor solution shows that significant inhibitor protection does not take place immediately and there is a lag phase in the first 50 min of immersion, suggesting that early localized corrosion drives further adsorption of inhibitor micelles on the metal surface. This is in agreement with X-ray photoelectron spectroscopy (XPS) analysis, which indicates a complete surface coverage over the first 2 h of immersion in a concentrated inhibitor solution. XPS also shows the heterogeneity of the film, where some parts are poorly covered, revealing the underlying surface containing iron.

Effect of organic component (tartrate) addition on cerium nitrate's ability to inhibit corrosion of mild steel in NaCl solution

Variation in Synergy of Corrosion Inhibition, on Mild Steel in NaCl Solution, Due to Rare Earth: Ce, Y, La, Nd in Rare Earth Tartrates

Sustainable development of an effective anti-corrosion film over the St12-steel surface against seawater attacks using Ce(III) ions/tri-sodium phosphate anions

Effect of cerium nitrate concentration on corrosion protection of hybrid organic/inorganic Si/Zr sol-gel coating applied on hot-dip galvanized steel

Cerium Tartrate As a Corrosion Inhibitor for AA 2024-T3

Effect of Citric Acid on Cerium Conversion Coating of Hot-Dip Galvanized Steel

Analysis of the Ce(III) chloride, Ce(III) nitrate, and Ce(III) propionate as corrosion inhibitor of the aluminum alloys in NaCl solution

Corrosion Inhibition of 3003 Aluminum Alloy by Cerium Chloride-Sodium Nitrite Blend in Flue Gas Condensate

Study on Cerium-Doped Nano-Tio2 Coatings for Corrosion Protection of 316 L Stainless Steel

Electrochemical and Surface Characterization Study on the Corrosion Inhibition of Mild Steel 1030 by the Cationic Surfactant Cetrimonium Trans-4-hydroxy-cinnamate

Synthesizing a Novel Cerium-Modified Graphene Powder to Achieve Long-Term Anticorrosion Performance of Epoxy Powder Coatings

Rare earth cerium-phenanthroline binary complex as a new corrosion inhibitor for carbon steel in acidic medium

Surface-modified cerium oxide as a corrosion inhibitor to enhance the performance of epoxy coatings

Benzalkonium chloride/titanium dioxide as an effective corrosion inhibitor for carbon steel in a sulfuric acid solution

Effect of cerium addition on non-metallic inclusions in a high-carbon chromium bearing steel

Synergistic effect of oxide nanoparticles and inorganic inhibitor on anti-corrosion performance of epoxy coating

Cerium Tartrate As A Pigment in Epoxy Coatings for Corrosion Protection of Aa 2024-T3

Growth mechanism of cerium salt conversion coating modified with citric acid on galvanized steel

Effect of Cerium on Inclusion Evolution and Pitting Corrosion of Nb-Microalloyed Steel.

Synergistic lanthanum /nitrogen co-modified carbon dots as steel corrosion inhibitor

Self-healing performance of smart coatings modified with different corrosion inhibitors