Abstract:When mesoporous nanomaterials and graphene oxide have been used in anti-corrosion coatings, new nanocoatings have attracted greater attention. Adding nano-fillers with special structures and corrosion inhibitors to epoxy coatings has been proven to effectively enhance the corrosion resistance of coatings. However, studies have pointed out that the added corrosion inhibitors are easily degraded by UV light and react with the metal substrate or materials in the coating, resulting in a significant reduction in the service life of the coating. To this end, in this study, the corrosion inhibitor was encapsulated in mesoporous silica with pH response, and the functional silica was composited with graphene oxide to prepare novel graphene oxide/functional mesoporous silica nanoparticles. Coatings with this special filler added have strong anti-corrosion potential and can be applied in marine anti-corrosion contexts, such as containers, in the future. The filler not only has a physical barrier ability but also can effectively prevent the degradation of the inhibitor due to ultraviolet rays. At the same time, in the early stage of corrosion, the release of inhibitors can be effectively controlled by the change in PH to achieve the purpose of preventing corrosion. UV spectrophotometry confirmed the stable encapsulation and controlled release of the inhibitor. Electrochemical-impedance spectroscopy showed that the |Z|0.01 Hz value of the smart anti-corrosion epoxy coating was about 10,000 times higher than that of the pure epoxy coating. Through the FT-IR mapping test, it was found that in the area of mechanical damage, the alkaline environment created by the initial corrosion can induce the release of tannic acid and react with common corrosion products to form iron tannins, which effectively inhibits the further occurrence of corrosion. This method provides an effective method for the design of heavy-duty anti-corrosion coatings.

Synergistic effect of oxide nanoparticles and inorganic inhibitor on anti-corrosion performance of epoxy coating

Effect of silane‐modified SiO2@Ce3+ nanoparticles on the mechanical property and anti‐corrosion for steel of the epoxy coating

Surface-modified cerium oxide as a corrosion inhibitor to enhance the performance of epoxy coatings

Cerium dioxide modified with fumaric acid as corrosion inhibitor for epoxy coatings on Q235

Design and synergistic effect of nano-sized epoxy-NiCo2O4 nanocomposites for anticorrosion applications

Impact of Co3O4 nanoparticles on epoxy's mechanical and corrosion-resistance properties for carbon steel in seawater

A Smart Anticorrosive Epoxy Coating Based on Graphene Oxide/Functional Mesoporous Silica Nanoparticles for Controlled Release of Corrosion Inhibitors

Corrosion Resistance of CeO2-GO/Epoxy Nanocomposite Coating in Simulated Seawater and Concrete Pore Solutions

One pot synthesis of amino silane grafted cerium phosphate (AS@CePO 4 ) as an effective anticorrosion nanopigment for epoxy coating

Enhancing anticorrosive performance of epoxy‐based ZnO nanocomposite coatings via 3‐(trimethoxysilyl)propyl methacrylate modification

Self-healing performance of smart coatings modified with different corrosion inhibitors

Anti-corrosion effect of chitin and chitosan nanoparticles in epoxy coatings

Use of CeO2 nanoparticles as CO2-corrosion inhibitors of a duplex stainless steel

A Novel Cerium Organic Network Modified Graphene Oxide Prepared Multifunctional Waterborne Epoxy-Based Coating with Excellent Mechanical and Passive/active Anti-Corrosion Properties

Advantages of CoS2 nano-particles on the corrosion resistance and adhesiveness of epoxy coatings

Developing single-atom catalyst-based epoxy coating with active nanocatalytic anticorrosion performance in oxygen environment

Effectiveness of Epoxy Coating Modified with Yttrium Oxide Loaded with Imidazole on the Corrosion Protection of Steel

Preparation of Anticorrosive Epoxy Nanocomposite Coating Modified by Polyethyleneimine Nano-Alumina

Nanomechanical and Electrochemical Properties of ZnO-Nanoparticle-Filled Epoxy Coatings

Effects of TiO2 Nanoparticles on the Overall Performance and Corrosion Protection Ability of Neat Epoxy and PDMS Modified Epoxy Coating Systems

Theoretical and experimental investigations about the role of MXene nanosheets covered with ZnO quantum dots on barrier resistance of epoxy coatings