Abstract:Aluminum alloys are extensively used in many fields such as aeronautics, astronautics, vehicle manufactures and living products clue to their good mechanical properties and anti-corrosion performance. Traditionally, the most effective corrosion protection technologies are based on the use of Cr6+ containing formulations to extend the applications of aluminum alloys in high corrosive media such as chlorides containing solutions. However, the recent recognition that chromates are highly toxic and carcinogenic has led to extensive research to develop new alternatives. Many works have been published using different conditions to obtain rare earth (RE) conversion layers on several aluminum substrates. Unfortunately, these reported anti-corrosion technologies based on RE modified films presented several drawbacks including long formation time, high formation temperature and even high potential in some cases. The goal of the present work is to introduce the novel cathode electrophoresis technique to quickly deposit cerium modified film on the surface of Al 5083. The morphology and structure of the RE. film were characterized by SEM, EDS and XRD, the corrosion resistance was investigated by EIS and potentiodynamic polarization curves in 0.1 mol/L NaCl solution. The results showed that uniform CeO2 film of 0.8 mu m thickness can be prepared by cathode electrophoresis process in 0.1 mol/L Ce(NO3)(3) ethanol solution at a voltage of 12 V for 60 s. Polarization curves confirmed its excellent protective property through inhibiting the cathodic reaction. Impedance data collected from EIS in 0.1 mol/L NaCl solution remained capacitive for 31 d, which indicated the lack of localized corrosion. With the increase of exposure time, the charge-transfer resistance R-p became higher, the surface capacitance C-t nearly kept constant and cracks of the film reduced obviously, demonstrating a self-healing property. Apparently local cathodes were covered during the RE modification processes, thereby reducing the driving force for pitting.

EFFECT OF CERIUM ON THE ELECTRONIC PROPERTY OF PASSIVE FILM FORMED ON Fe-3Cr ALLOY

Effect of Cerium on Microstructure, Texture and Properties of Ultrahigh-Purity Copper

Effect of Ce on the localized corrosion behavior of non-equiatomic high-entropy alloy Fe40Mn20Cr20Ni20 in 0.5 M H2SO4 solution

Changes of Corrosion Electrochemical Behavior of Cerium Nitrate Doped GPTMS/TEOS Silane Hybrid Films with Immersion Time

Characterization and Cathode Electrophoresis Deposition of Cerium Modified Films on Al 5083

Effect of Cerium Content on Anodic Behavior of Pb-Ce Alloy in Sulfuric Acid Solution

Effect of cerium on the anodic corrosion of Pb–Ca–Sn alloy in sulfuric acid solution

The Effect of Cerium Substitution on Electromagnetic Properties of NiZn Ferrites

Effect of Na2CO3 on Corrosion Resistance of Cerium Conversion Film on Mg–Gd–Y–Zr Magnesium Alloy Surface

Composition and corrosion resistance of cerium conversion films on 2195Al-Li alloy

The Effect of Cerium on the Anodic Behavior of Pb-Ca-Sn Alloy in Sulfuric Acid Solution

Influence of Cerium Content on the Corrosion Behavior of Al-Co-Ce Amorphous Alloys in 0.6 M NaCl Solution

Electrodeposition of cerium (III)-modified bis-[triethoxysilypropyl]tetra-sulphide films on AA2024-T3 (aluminum alloy) for corrosion protection

Influence of Temperature, Chloride Ions and Chromium Element on the Electronic Property of Passive Film Formed on Carbon Steel in Bicarbonate/carbonate Buffer Solution

Effect of Ce on the pitting corrosion resistance of non-equiatomic high-entropy alloy Fe40Mn20Cr20Ni20 in 3.5wt% NaCl solution

Effect of Ce on the Microstructure and Corrosion Resistance of Al-5Mg-3Zn-1Cu Alloy

Effect of Ce on Intergranular Corrosion of 00Cr12 Ferrite Stainless Steel

Effect of 0.3 at. % Ce on the corrosion resistance of Fe40Ni20Co20Cr20 high-entropy alloy in 3.5 wt% NaCl solution

Study on the structure of corrosion film and the performance of the Pb-Ca-Sn-Ce alloy

The effect of Ce on the performance of lead-antimony grid

Effect of the addition of cerium on the microstructure evolution and thermal expansion properties of cast Al-Cu-Fe alloy