Abstract:ABSTRACTIn this study, various poly(ethylene terephthalate) (PET) and linear low‐density polyethylene (LLDPE) with maleic anhydride‐grafted LLDPE (LLDPE‐g‐MAH) compatibilizer were melt blended under an elongational flow. A novel extrusion device, eccentric rotor extruder (ERE), was developed to supply such flow during the process. Including morphology, mechanical properties, melting behavior, and rheological behavior were studied. The morphological study showed that the compatibility between LLDPE and PET was greatly improved with LLDPE loading up to 80 wt %. Mechanical tests indicated that LLDPE could toughen PET to some extent. Moreover, a comparison of samples prepared between ERE and conventional extruder was made and demonstrated the sample prepared by ERE can exhibit better mechanical properties. Differential scanning calorimetry results revealed that PET can promote the crystallinity of LLDPE. Rheological behavior indicated that the complex viscosity of the blends exhibited strong shear thinning phenomenon with increasing LLDPE content, particularly in high‐frequency range blend with the LLDPE weight ratio of 80 wt % was more sensitivity to shear rate than neat LLDPE. The G′‐G″ curves of the blends also revealed that the microstructure of the blends changed significantly with the addition of LLDPE which was consistent with the scanning electron micrographs that PET particles became smaller and distributed more uniform with increasing LLDPE content. Furthermore, the blends showed similar stress relaxation mechanism with adding LLDPE content from 60 to 100 wt %. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46489.

In Situ Reactive Compatibilization of HDPE/PET Blends

In Situ Reactive Interfacial Compatibilization of Poly(Ethylene Terephthalate)/Metallocene Polyethylene Blends

Structure-property Relationships of Reactively Compatibilized PHB/EVA/starch Blends.

The Preparation of Polyethylene/Collagen Composites by Using Reactive Compatibilization Process

Reactive Compatibilization and Properties of Recycled Poly(Ethylene Terephthalate)/Poly(Ethylene-Octene) Blends

In Situ Compatibilization of Isotactic Polypropylene and High-Density Polyethylene by a Melt Cobranching Reaction

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin

Structure and Properties of Compatibilized Recycled Poly(ethylene Terephthalate)/linear Low Density Polyethylene Blends

Fabrication of poly(ethylene terephthalate)/polypropylene-based elastomer blends with balanced stiffness-toughness: The effect of reactive compatibilization

Toughening of Poly(ethylene Terephthalate) and Optimizing of the Compatibilization Between PET and EPDM by Functionalized EPDM

Linear Low‐density Polyethylene/poly(ethylene Terephthalate) Blends Compatibilization Prepared by an Eccentric Rotor Extruder: A Morphology, Mechanical, Thermal, and Rheological Study

Unlocking superior properties in polypropylene/polyethylene terephthalate (PP/PET) blends using an ethylene-butylene-acrylate terpolymer reactive compatibilizer

MORPHOLOGICAL EVOLUTION AND VISCOELASTIC BEHAVIOR OF COMPATIBILIZED HDPE/PA6 BLENDS

Study on Reactive Blends of PET/LLDPE-g-MA

Study on Reactive Compatibilization of PLA/LLDPE Blends

Effect of Compatibilizer on Morphology and Properties of HDPE/Nylon 6 Blends

Effect of Compatibilizer on the Transfer and Tribological Behaviors of PA46/HDPE Polyblends

Studies on blends of LLDPE and polar polymers compatibilized by a random copolymer

Compatibilization of Polypropylene/recycled Polyethylene Terephthalate Blends with Maleic Anhydride Grafted Polypropylene in the Presence of Diallyl Phthalate

Effect of Poly(Acrylic Acid)-Modified Poly(Ethylene Terephthalate) on Improving the Integrated Mechanical Properties of Poly(Ethylene Terephthalate)/Elastomer Blend

Effect of addition of multifunctional monomers on one-step reactive extrusion of PP/PS blends