Abstract:In this article, we conducted a study on the design, processing, 3D/4D printing, and characterization of mechanical properties, thermomechanical properties, printability, morphology, and shape memory performance of the novel PETG–PBAT blends. For this purpose, polyethylene terephthalate glycol (PETG)–polybutylene adipate terephthalate (PBAT) blends with three weight percentages of 10, 20, and 30 PBAT were prepared using melt mixing. After undergoing various stages, granules were obtained for 3D printing. The 3D printing was done using the granule-based material extrusion method equipped with a pneumatic system to direct the melt flow to the nozzle, and this method made the conditions of controlling and manipulating the melt flow easier to achieve ideal and uniform printing. The results of the thermomechanical and morphological investigations indicated that the PETG–PBAT was immiscible with proper compatibility of the two phases. This issue was also effective in achieving excellent mechanical properties and printability. Tensile strength and elongation increased and decreased, respectively, with increasing PBAT. The PBAT10% had a tensile strength of 36 MPa and an elongation of 51%, which is great compared to fused deposition modeling 3D printing material library. The proper compatibility of the two phases, the excellent printability due to the control of the output melt flow and the selection of the printing parameters were the reasons for achieving excellent mechanical properties. Despite the low printability, the PBAT30% sample showed more than 100% elongation and good toughness. The results of the shape memory performance demonstrated that with the increase in the PBAT due to the reduction in the transition temperature and the strengthening of the elastic part, a higher shape recovery was achieved at a faster rate.

Effect of Poly(Acrylic Acid)-Modified Poly(Ethylene Terephthalate) on Improving the Integrated Mechanical Properties of Poly(Ethylene Terephthalate)/Elastomer Blend

Fabrication of poly(ethylene terephthalate)/polypropylene-based elastomer blends with balanced stiffness-toughness: The effect of reactive compatibilization

Preparation and Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Alloys with High Toughness

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin

Toughening of Poly(ethylene Terephthalate) and Optimizing of the Compatibilization Between PET and EPDM by Functionalized EPDM

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Application of Macromolecular Chain Extender and Contribution to the Toughening of Poly(Ethylene Terephthalate)

Mutual Nucleating and Crystallization Behavior of Poly (ethylene Terephthalate)/polyamide 66 Blends

Preparation and Properties of Poly(ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate)/Polyglycolic Acid (PETG/PGA) Blends

Design of super-toughened, heat-resistant and antistatic polyethylene terephthalate-based blend composites by constructing a tenacious interface

Unlocking superior properties in polypropylene/polyethylene terephthalate (PP/PET) blends using an ethylene-butylene-acrylate terpolymer reactive compatibilizer

Improving the compatibility and toughness of sustainable polylactide/poly(butylene adipate-co-terephthalate) blends by incorporation of peroxide and diacrylate

Supertoughened Polylactic Acid/Polybutylene Adipate Terephthalate Blends Compatibilized with Ethylene-Methyl Acrylate-Glycidyl Methacrylate: Morphology and Mechanical Properties by the Response Surface Methodology

Non-isothermal Crystallization Kinetics and Rheological Behaviors of PBT/PET Blends: Effects of PET Property and Nano-Silica Content

Influence of Different Molecular Weights and Concentrations of Poly(glycidyl methacrylate) on Recycled Poly(ethylene terephthalate): A Thermal, Mechanical, and Rheological Study

Effect of Different Compatibilizers on the Properties of Poly (Lactic Acid)/Poly (Butylene Adipate-Co-Terephthalate) Blends Prepared under Intense Shear Flow Field

Effect of Addition of Pp-G- (Gma-Co-st) on Morphologies and Properties of Pbt/Pp Blends

Effect of Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer on toughness and biodegradation of poly (l-lactic acid)

Styrene‐assisted Melt Free‐radical Grafting of Pentaerythritol Triacrylate Onto Polypropylene and Its Crystallization Behavior

Influence of the Degree of Grafting on the Morphology and Mechanical Properties of Blends of Poly(butylene Terephthalate) and Glycidyl Methacrylate Grafted Poly(ethylene‐co‐propylene) (EPR)

Design, processing, 3D/4D printing, and characterization of the novel PETG–PBAT blends