Abstract:A novel strategy for introducing long chain branches (LCB) on commercial polypropylene (PP) was described using an extender agent, poly (hexamethylendiamine-guanidine hydrochloride) (PHGH), to couple with glycidyl methacrylate-grafted PP (PP-GMA). The presence of LCB was confirmed by GPC and melt strength measurements in two modified PP samples, MPP-1 and MPP-2. The foamability of LCB PPs and commercially linear PP (EPS) was investigated by foam extrudate. The results showed that the foamability of LCB PPs was significantly improved. To find out the difference in foamability of EPS and LCB PPs, some rheological properties were investigated. In the dynamic shear measurement, it was found that the elastic response of LCB PPs at low frequencies was distinctly enhanced in comparison with that of EPS, implying a presence of a long relaxation time mode that was not revealed in linear PP. The elongational rheology results showed that the strain hardening behaviors of LCB PPs were still intense even at higher strain rate of 1s−1; moreover, MPP-2 could sustain larger elongational stress and deformation, which helps to improve the foamability. In step-shear stress relaxation measurements, the fast and slow relaxation processes were observed over the entire ranges of strains, indicating the presence of two different relaxation time modes. Also, the strain dependence of slow damping function became weaker because of the introduction of LCB on linear PP. In addition, it was also found that the rheological behaviors characterizing the long relaxation time mode were further enhanced with the increase of the concentration of PHGH in the melt grafting reactions.

Properties and production technology of easy-processing linear low density polyethylene

A Comprehensive Review on Controlled Synthesis of Long-Chain-Branched Polyolefins: Part 2, Multiple Catalyst Systems and Prepolymer Modification

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

State-of-the-art and research progress of polyolefin-based elastomer

Recent advances and prospect of ethylene terpolymerization

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Polyethylene plastic production process

Research Progress of Linear Low Density Polyethylene Modification

Advances in Preparation of Linear Low -Density Polyethylene by in Situ Copolymerization of Ethylene

Lowly branched-highly branched block polyethylene: Synthesis, characterization and application

Study on properties of HDPE/LLDPE/POE blown films

Synthesis and Characterization of High‐density Polypropylene‐grafted Polyethylene Via a Macromolecular Reaction and Its Rheological Behavior

Preparation and Characterization of High Melt Strength Polypropylene with Long Chain Branched Structure by the Reactive Extrusion Process

Modified high-density polyethylene films: preparation, composition and their physical properties

PROGRESS IN ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE/POLYPYLENE BLENDS

A novel strategy for the preparation of long chain branching polypropylene and the investigation on foamability and rheology

Preparation and characterization of long-chain branched HDPE by UV-induced reactive extrusion at mild temperature

Preparation of Linear Low‐density Polyethylene by in Situ Copolymerization of Ethylene with Zr Supported on Montmorillonite/fe/methylaluminoxane Catalyst System

A Closed‐Loop Recyclable Low‐Density Polyethylene

Extrusion Processing of Ultra-High Molecular Weight Polyethylene

The decomposition mechanism of ethylene and modeling simulation during LDPE production: A comprehensive review and perspectives