Abstract:The reactive extrusion of maleic anhydride grafted polypropylene (PP-g-MAH) with ethylenediamine (EDA) as coupling agent was carried out in a co-rotating twin-screw extruder to produce long chain branched polypropylene (LCBPP). Part of PP-g-MAH was replaced by maleic anhydride grafted high-density polyethylene (HDPE-g-MAH) or linear low-density polyethylene (LLDPE-g-MAH) to obtain hybrid long chain branched (LCB) polymers. Compared with the linear PP, PE and their blends, the LCB polyolefins exhibit excellent dynamic shear and transient extensional rheological characteristics such as increased dynamic modulus, higher low-frequency complex viscosity, significantly enhanced melt strength and strain-hardening behaviors. LCB polymers also have higher tensile strength, tensile modulus, impact strength and lower elongation at break than linear polymer and their blends. Supercritical carbon dioxide (scCO2) was introduced in the reactive extrusion process. With the presence of scCO 2, the motor current of twin extruder was decreased and LCB polyolefins with lower MFR, higher complex viscosity and increased tensile strength and modulus were obtained. This indicates that the application of scCO2 can reduce the viscosity of melt in extruder, enhance the diffusion of reactive species, facilitate the reaction between functional groups, and increase the LCB density. The foaming behavior of both linear and LCB polyolefins were studied. The results show that cellular materials produced from the LCB polyolefins have higher weight reduction, smaller cell size and better mechanical properties than those produced from the linear polymers.

Research Progress of Linear Low Density Polyethylene Modification

Research Progress on Modification of Epoxy Resin

Recent advances and prospect of ethylene terpolymerization

Properties and production technology of easy-processing linear low density polyethylene

Advances in Modification of Ethylene Propylene Random Copolymer

Modified high-density polyethylene films: preparation, composition and their physical properties

Research Progress on Flame Retardant of Bio-degradable PLA

Recent advances in flame retardant and mechanical properties of polylactic acid: A review

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

A Review: Research Progress in Modification of Poly (Lactic Acid) by Lignin and Cellulose

PROGRESS IN ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE/POLYPYLENE BLENDS

Polyethylene plastic production process

Physical and Thermal Properties of High-Density Polyethylene Film Modified with Polypropylene and Linear Low-Density Polyethylene

Recent advances in polyolefin technology

Research Progress on Modification of Heat Resistance and Toughness for Polyvinyl Chloride in China

Morphology evolution and mechanical property enhancement of linear low‐density polyethylene by adding disentangled ultrahigh molecular weight polyethylene

Research Progress in the Synthesis and Modification of Polylactic Acid

Progress in analysis of structure and properties of hiPP

Recent Research Progress on the Flame-Retardant Mechanism of Halogen-Free Flame Retardant Polypropylene

Progress in Research on Surface Functionalization of Polyethylene

Flow‐field‐assisted Shaping of Linear Low‐density Polyethylene/low‐entanglement Ultra‐high Molecular Weight Polyethylene Blends with Enhanced Mechanical Properties and Thermal Conductivity