Abstract:Fused Filament Fabrication (FFF), is one of the most widely used additive manufacturing technologies today, which has been used for a variety of applications. Due to the layer-by-layer manufacturing process, FFF parts are inferior to those fabricated by traditional methods in terms of tensile properties, which is one of the most significant defects that hinder the development of this technique. In this study, a vibration was utilized during the FFF process by piezoelectric ceramics electric plates to improve the mechanical properties of the built parts and surface quality of PLA FFF parts. Subsequently, an investigation of the tensile and the surface quality of PLA FFF specimens built-in X and Z-direction fabricated individually without and with vibrations utilized has been done. Furthermore, a theoretical model has been established to predict the tensile strength and plasticity of FFF parts fabricated without and with vibrations utilized based on classical laminated plate theory, with the anisotropic and laminated characteristics taken into consideration. Young's modulus model has been established based on the laminated plate theory and flexural vibration theoretical approaches of a plate for the PLA FFF parts manufactured without and with vibrations utilized respectively. Compared with the previous models this model provides the tensile strength and plasticity of FFF parts both manufactured without and with vibrations utilized. The results indicate that the predicted tensile strength and plasticity of the PLA FFF parts manufactured with vibrations utilized have a good consistency with the experimental ones, meanwhile, vibration utilization can significantly improve the surface quality of the PLA FFF samples manufactured in the Z-direction, and the scanning electron microscopy (SEM) analysis confirmed that vibration utilization can improve the forming quality of FFF manufactured parts.

Effect of vibration parameters on mechanical properties of resin articles in plasticizing process

Effect of Vibration Parameters on Properties of Polypropylene in Dynamic Plasticizing Process

Study on the Effect of Axial Vibration of Screw in Plasticating Process (Extrusion Part)

Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding

Mechanical Properties of Dynamic Extruded PP by Coat-hanging Die

THE EFFECT OF MECHANICAL VIBRATION ON CRYSTALLIZATION OF POLYPROPYLENE

Experimental Study on Improving the Mechanical Properties of Material Extrusion Rapid Prototyping Polylactic Acid Parts by Applied Vibration

Effect of speed sinusoidal pulsating enhancement on the mixing property of plastic machinery

Effects of Physical Crosslinking on Properties of Plasticized High Molecular Weight PVC

Study on Properties of Filling Systems in Plastic Axial Vibration Injection Processing

Key technology of plastic forming with low frequency vibration

Effect of processing parameter changes on mechanical properties during injection molding: Amorphous versus semi‐crystalline materials

Modification of polypropylene by melt vibration blending with ultra high molecular weight polyethylene

Energy Dissipation in Polymer Injection Moulding under Vibration Force Field

Effect of Viscosity Ratio on Morphology and Mechanical Properties of PP/HDPE Blend

Investigation on the improvement of mechanical properties and surface quality of the polylactic acid (PLA) fused filament fabrication parts manufactured without and with vibrations dependent utilization

Effects of processing on mechanical properties of polypropylene composites

Effect of Vibration Pretreatment–Microwave Curing Process Parameters on the Mechanical Performance of Resin-Based Composites

Experimental study on mechanical behaviors of injection molded PC/PMMA blends

Physical and chemical effects of ultrasound vibration on polymer melt in extrusion

Effect of rapid heating cycle injection mold temperature on crystal structures, morphology of polypropylene and surface quality of plastic parts