Abstract:Micro relative sliding exists on the contact surface of the main primary equipment's surface structures, resulting in serious fretting fatigue. The plastic effect causes serious fatigue to the structure under alternating loads. Existing fatigue life prediction models fail to fully consider the shortcomings of fretting and plastic effects, which causes the prediction results to be significantly different to real-lifeworld in engineering situations. Therefore, it is urgent to establish a fretting damage fatigue life prediction model of contact structures which considers plastic effects. In this study, a plastic fretting fatigue life prediction model was established according to the standard structural contact theory. The location of dangerous points was evaluated according to a finite element simulation. The cyclic load maximum stress value was compared with the fretting fatigue test data to confirm the error value, and the error between the proposed fretting fatigue life model and the test value was within 15%. Concurrently, we combined this with mass data analysis and research, as it is known that the contact zone parameters have an impact on fretting fatigue and affect the structural lifespan. With the help of ABAQUS, the fretting numerical calculation of the dovetail tenon model was carried out to analyze the sensitive factors affecting the fretting fatigue life of the dovetail tenon structure. By keeping the fretting load unchanged, the contact area parameters such as contact surface form, contact area width and friction coefficient were changed in order to calculate the fretting stress value, σfretting and the dovetail structure was improved to extend its fretting fatigue life. Finally, it was concluded that fretting fatigue was most sensitive to the width and contact form of the contact area. In actual engineering design, multiple factors should be considered comprehensively to determine a more accurate and suitable width and form of the contact area. For the selection of friction coefficient, on the premise of saving costs and meeting the structural strength requirements, the friction coefficient should be as small as possible, and the problem can also be solved through lubrication during processing.

Mathematical Prediction of the Influence of Textile Parameters on Fatigue Performance of Vascular Prostheses

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

A New Device to Study Fatigue Performance and Mathematical Model to Analyze Relationship between Textile Parameters and Fatigue of Textile Scaffold for Stent-Graft

Comparative Study Of The Influence Of Textile Parameters On The Fatigue Behavior Of Woven Endovascular Prostheses With Pulsatile Flow And Pulsatile Pressure

PREDICTION OF THE VERTICAL PERMEABILITY COEFFICIENT BASED ON FRACTAL THEORY FOR WOVEN SLIT-FILM GEOTEXTILES

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

A Method To Predict Fatigue Performance Of Artificial Blood Vessels

Fatigue Behaviors Of Twill Weave Fabric Tube Of Endovascular Prostheses

Mechanical Prediction and Experimental Verification of Self-Lubricating Fabric Composites

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

In vitro fatigue properties of prototype textile components of endovascular devices

Influence Of Textile Design And Processes On The Mechanical Properties Of Woven Endovascular Prostheses

Machine Learning Prediction of Mechanical Properties of Braided-Textile Reinforced Tubular Structures

Finite element parameterization modeling and thermal performance analysis for woven fabrics using unit cell models

Prediction and evaluation of fatigue life via modified energy method considering surface processing

A Prediction of in Vivo Mechanical Stresses in Blood Vessels Using Thermal Expansion Method and Its Application to Hypertension and Vascular Stenosis

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

Predicting the Mechanical Properties of Nonwoven Geotextiles with the Finite Element Method

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

Parametric theoretical prediction of elastic properties and strength of fine weave pierced C/C composites

Fretting Fatigue Life Prediction of Dovetail Structure Based on Plastic Effect and Sensitivity Analysis of Influencing Factors