Abstract:It is of significance to reveal the low-cycle fatigue deformation mechanism of titanium alloy with tri-modal microstructure for improving its properties. This work developed a crystal plasticity finite element model based on realistic microstructure to predict the low-cycle fatigue behavior of TA15 titanium alloys with tri-modal microstructure containing primary α (αp), secondary lamellar α (αl) and transformed β (βt). During modelling, plastic strain accumulation (PSA) and energy dissipation were used as the fatigue indicator parameter (FIP) to predict fatigue damage and life. It is found that the fatigue deformation prefers to localize at the interfaces of αp/β, αl/β and at triple junctions, which leads to the initiation of fatigue crack. In addition, the soft geometry of αl will also contribute to the strain localization inside αl grains causing fatigue damage. This is because the local lattice rotation is more prone to occur at these locations due to the tension-compression asymmetry of lattice rotation, which induces the occurrence of the microtexture and aggravates the heterogeneity of the lattice rotation, leading to the localized PSA and the total energy dissipation. And the asymmetry of lattice rotation in each cycle also leads to the tension-compression asymmetry of flow behavior. Both of the two FIPs can effectively predict fatigue life. With the strain amplitude increasing, the PSA-based model shows a relatively higher predictive accuracy of fatigue life than that of the accumulated energy dissipation-based model. The predicted fatigue life is in accordance with the C-M model.

Prediction and evaluation of fatigue life via modified energy method considering surface processing

A New Approach to Low-Cycle Fatigue Damage Based on Exhaustion of Static Toughness and Dissipation of Cyclic Plastic Strain Energy During Fatigue

A New Approach for Studying Fatigue Damage

Multiaxial Fatigue Life Prediction Based on Damage Mechanics and Critical Plane Method

Study on fracture mechanism and fatigue life prediction for cutting insitu tib2/7050al mmcs

Low-cycle Fatigue Behavior and Life Prediction of TA15 Titanium Alloy by Crystal Plasticity-Based Modelling

Predicting the Fatigue Life of Machined Specimen Based on Its Surface Integrity Parameters

Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion

A Modified Cumulative Damage Model for Fatigue Life Prediction under Variable Amplitude Loadings

A life prediction model for rolling contact fatigue based on the improved moment of load path method

A general energy-based model for fatigue life prediction of high-temperature structural materials

Fatigue Life Prediction of Cold Expansion Hole Using Physics-Enhanced Data-Driven Method

A Novel Fatigue Life Model Considering Surface-Damage Induced Performance Degradation

Numerical Modeling and Experimental Investigation on Fatigue Failure and Contact Fatigue Life Forecasting for 8620H Gear

Continuum Damage Mechanics Based Probabilistic Fatigue Life Prediction for Metallic Material

An Approach for Fatigue Life Prediction

An improved strength degradation model for fatigue life prediction considering material characteristics

On the Post-Impact Fatigue Behavior and Theoretical Life Prediction of CF/PEEK-titanium Hybrid Laminates Using an Energy Dissipation Approach

New Approach Based on Continuum Damage Mechanics with Simple Parameter Identification to Fretting Fatigue Life Prediction

A New Damage Mechanics Based Approach to Fatigue Life Prediction and Its Engineering Application

A Crystal Plastic Finite Element Model for the Effect of Surface Integrity on Multiaxial Fatigue Life after Multistage Machining Processes