Abstract:We studied the growth of carbon nanotubes(CNTs) over a Co/Mo/Al_2O_3 catalyst by decomposing ethylene with or without the assistance of water.The optimal amount of water was determined to be 0.6%(φ) since excess water removed the amorphous carbon around the catalysts and also directly etched the CNTs at high temperature.Under this condition,the yield of CNTs can be increased from 3.7 g·g~(-1),based on the mass of catalyst,to 70 g·g~(-1) within 1 h.The time-dependent online conversion of ethylene and the ratio of effective catalysts suggested that the effect of water is insignificant in the final growth period of the CNTs compared to that at the beginning.The correlation between the relative activity of the catalyst and the relative density of the CNT agglomerate suggests that the lack of growth volume inside the CNT agglomerate results in a gradual deactivation of the catalyst in the final CNT growth period. Raman characterization suggests that the degree of CNT defects increases with the bulk density of the CNT agglomerates since the mechanical resistance that is exposed on CNTs inside the agglomerate increases with reaction time.Thermal-gravimetric analysis indicates that the purity of CNTs ranges from 95.0%to 99.9%for a product with average purity of 99.2%.The non-uniform purity of the CNTs is due to the difference in mechanical resistance inside and outside the CNT agglomerate.The growth of CNTs outside the agglomerate is nearly free of mechanical resistance compared to that inside the agglomerate and,consequently,results in a high yield and high purity for the CNTs.These results suggest that it is necessary to control the agglomerate size and the structure,and to use a reactor with a large reactor volume for the growth of CNTs with low resistance and with high yield.

Influence of Mo on the Growth of Single-Walled Carbon Nanotubes in Arc Discharge.

Influence of Mo on the Fe:Mo:C nano-catalyst thermodynamics for single-walled carbon nanotube growth

Influence of NH3 Atmosphere on the Growth and Structures of Carbon Nanotubes Synthesized by the Arc-Discharge Method

Influence of Cerium Metal As Catalyst on the Growth and Structure of Single-Walled Carbon Nanotubes

Study on the Definite Direction Growth of Carbon Nanotubes by the Microwave Plasma-Enhanced Chemical Vapro Phase Deposition

Controlled Growth of Single-Walled Carbon Nanotubes by Catalytic Decomposition of CH4 over Mo/Co/MgO Catalysts

Effect And Mechanism Of Water On Carbon Nanotubes Growth

The influence of different atmosphere gases on the growth and structure of double-walled carbon nanotubes

Synthesis Of Large Quantity Single-Walled Carbon Nanotubes By Arc Discharge

Effects of Oxygen on Multiwall Carbon Nanotubes Growth by PECVD

An Efficient Method to Produce Single-Walled Carbon Nanotubes by Round-Trip Arc Discharge

Pressure Effects on Nanotubes Formation Using the Submerged Arc in Water Method

Carbon Nanotubes Grown on the Surface of Cathode Deposit by Arc Discharge

Water-Assisted Growth of Carbon Nanotubes over Co/Mo/Al_2O_3 Catalyst

Combination effect of growth enhancers and carbon sources on synthesis of single-walled carbon nanotubes from solid carbon growth seeds

Mass-production of single-wall carbon nanotubes by arc discharge method

Synthesis of Single-Walled Carbon Nanotubes with Narrow Diameter Distribution by Calcination of a Mo-Modified Fe/MgO Catalyst

Synthesis Of High Quality Single-Walled Carbon Nanotubes By Cvd And Effect Of Catalyst'S Acidity-Basicity On Nanotubes Growth

Effect of organic additives in catalyst preparation on the growth of single-wall carbon nanotubes prepared by catalyst-assisted chemical vapour deposition

Synthesis of Thin-Walled Carbon Nanotubes from Methane by Changing the Ni/Mo Ratio in a Ni/Mo/MgO Catalyst

Effect of adding W to Fe catalyst on the synthesis of SWCNTs by arc discharge