Abstract:Serrated chips, consisting of extremely uneven plastic deformation, are a prominent feature of high-speed machining of difficult-to-machine materials. This paper focuses on the evolution of chip form, chip morphology features (chip free surface, tool-chip contact surface, and chip edge), and chip segment parameters in subsequent high-speed ( v c =50 and 150 m min −1 ) machining of selective laser melted (SLMed) Ti6Al4V alloys, which are significantly different from conventional Ti6Al4V alloy in microstructure, mechanical properties and machinability. The effect of laser beam scanning schemes (0°, 67.5°, and 90°), machined surfaces (top and front), and cutting speeds on serrated chip characteristics of SLMed Ti6Al4Valloys was investigated. Based on the Johnson-Cook constitutive model of SLMed Ti6Al4V alloys, an orthogonal cutting model was developed to better understand the effect of physical-mechanical properties on the shear localization, which dominates the formation mechanism of serrated chips in post-machining of SLMed Ti6Al4V alloy. The results showed that the critical cutting speed (CCS) for chip serration of SLMed Ti6Al4V alloy is lower than that for serrated chips of conventional Ti6Al4V alloy, and the serrated profile of SLMed Ti6Al4V chips was more regular and pronounced. Besides, due to anisotropic microstructure and mechanical properties of SLMed Ti6Al4V alloys, the serration degree of chips produced on the top surfaces of SLMed Ti6Al4V alloys is more prominent than that of chips generated on the front surfaces. In addition, because of the poor deformation coordination and high plastic flow stresses of needle-like martensite α′, the plastic flow and grain distortion in the adiabatic shear band (ASB) of SLMed Ti6Al4V chips are significantly smaller than those in the ASB of conventional Ti6Al4V with equiaxed grains.

Influence of Shear Temperature on Chip Formation of Turning GH4169

Finite Element Analysis of Adiabatic Shear Band Formation in Titanium Alloy Cutting Process

Simulation of Chip Formation in High-Speed Hard Machining

Mechanism of Saw-Tooth Chip Formation of Titanium Alloy Based on Finite Element Simulation

Effect of cutting conditions on the serrated chip formation in high-speed cutting

Influence of Tool Geometrical Parameters on High Speed Cutting of Titanium Alloy Ti6Al4V

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Fe Analysis of the Effects of Cutting Speed on Thermomechanical Responses of Aisi 4142 Steel in High Speed Cutting

Understanding The Deformation Of Metals In High Speed Cutting

Chip Formation Mechanism in Dry Hard High-Speed Orthogonal Turning of Hardened AISI D2 Tool Steel with Different Hardness Levels

Grain size influence on chip formation in high-speed machining of pure iron

Research on the analytical modeling of critical conditions of serrated Chip formation based on thermal-mechanical coupled material behavior

Theoretical Analysis of Serrated Chip Formation Based on Ideal Models in High Speed Cutting

Inlfuences of Material Tool and Tool Wear on Cutting Temperature of Turning Titanium Matrix Composites

Research on chip formation parameters of aluminum alloy 6061-T6 based on high-speed orthogonal cutting model

Numerical and Experimental Investigation of the Shear Angle in High-Speed Cutting of Al6061-T6

Serrated chip characteristics and formation mechanism in high-speed machining of selective laser melted Ti6Al4V alloys

The Computer Simulation of the Temperature Distribution on the Surface of Ceramic Cutting Tools

Chip morphology and cutting temperature of ADC12 aluminum alloy during high-speed milling