Abstract:The cutting temperature is a key factor which directly affects cutting tool wear, workpiece surface integrity and machining precision in the high speed machining (HSM) process. The purpose of this paper is to present an inverse heat-transfer model considering three-dimensional transient heat conduction to calculate the heat flux and the temperature distribution on the tool–workpiece interface in the high speed milling process. The model was set up by a finite element method based on Beck’s inverse heat-conduction theory and was verified by numerical simulations and a series of experiments which aimed to obtain the surface temperature data of a thin-walled workpiece with the aid of an infrared thermometer and the tool–workpiece interface temperature by an embedded artificial thermocouple. The dynamic characteristics of the cutting temperature in high-speed milling aluminum alloy were studied systematically. The numerical simulation results revealed that there was a close agreement between the calculated temperature value and the measured temperature value of the cutting interface in high-speed milling of aluminum alloy. The inverse heat-conduction method can be used to estimate the heat flux flowing into the workpiece and the temperature distribution on the tool–workpiece interface. Using the infrared thermometer as a remote sensor can solve the problem of measuring the temperature in high-speed milling and also it can be used as an approach to reveal the cutting mechanism of high-speed milling. There exists a critical cutting speed in the high-speed milling aluminum alloy. The value of this critical speed will be different for the different cutting conditions. Constant feed per tooth must be kept in high-speed milling to efficiently suppress excessive heat generation while obtaining a high material removal rate, especially for machining difficult to-cut materials with a thin-wall construction. The average tool–workpiece interface temperature is influenced by the thickness of the workpiece. The related temperature distributions will be very beneficial to the optimal construction design for the thin-wall parts used in the aeronautics and astronautics as well as die and mold industries.

Chip morphology and cutting temperature of ADC12 aluminum alloy during high-speed milling

Experimental Studies of Cutting Temperature During High-Speed Milling of Aerospace Aluminum

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Experimental research on the dynamic characteristics of the cutting temperature in the process of high-speed milling

Understanding The Deformation Of Metals In High Speed Cutting

Effect of cutting conditions on the serrated chip formation in high-speed cutting

Adhesion Behavior and Mechanisms in High Speed Machining of Cellular Aluminum Alloy

Finite Element Modeling of High-Speed Milling 7050-T7451 Alloys

Research on chip formation parameters of aluminum alloy 6061-T6 based on high-speed orthogonal cutting model

Serrated chip characteristics and formation mechanism in high-speed machining of selective laser melted Ti6Al4V alloys

Investigation on Morphological Evolution of Chips for Ti6Al4V Alloys with the Increasing Milling Speed

Study on the Orthogonal Cutting Process of Al7050T7451 with Uncoated and Coated Tools

Analyzing The Effect Of Tool Edge Radius On Cutting Temperature In Micro-Milling Process

High Speed Milling Titanium Alloy With Respect To Cutting Tooth Number

Simulation Study on Milling Force and Temperature in High-speed Milling of 7050-T745 1 Aluminum Alloy

Investigation of Chip Formation Mechanism and Surface Integrity in High Speed Milling Titanium Alloy

The effect of chip formation on the cutting force and tool wear in high-speed milling Inconel 718