Abstract:Usually, there are several methods, e.g. experiment, interpolation experiment-based, analytic function, and Monte-Carlo simulation, to calculate the response functions in LaBr3(Ce) detectors. In logging applications, the experiment-based methods cannot be adopted because of their limitations. Analytic function has the advantage of fast calculating speed, but it is very difficult to take into account many effects that occur in practical applications. On the contrary, Monte-Carlo simulation can deal with physical and geometric configurations very tactfully. It has a distinct advantage for calculating the functions with complex configurations in borehole. A new application of LaBr3(Ce) detector is in natural gamma-rays borehole spectrometer for uranium well logging. Calculation of response functions must consider a series of physical and geometric factors under complex logging conditions, including earth formations and its relevant parameters, different energies, material and thickness of the casings, the fluid between the two tubes, and relative position of the LaBr3(Ce) crystal to steel ingot at the front of logging tube. The present work establishes Monte-Carlo simulation models for the above-mentioned situations, and then performs calculations for main gamma-rays from natural radio-elements series. The response functions can offer experimental directions for the design of borehole detection system, and provide technique basis and basic data for spectral analysis of natural gamma-rays, and for sourceless calibration in uranium quantitative interpretation.

Monte Carlo simulation of gamma-ray spectra using a LaBr3 detector

Monte-Carlo Simulation of Response Functions for Natural Gamma-Rays in LaBr3 Detector System with Complex Borehole Configurations

Monte Carlo simulation of in situ LaBr gamma-ray spectrometer for marine environmental monitoring.

Modelling the Response of CLLBC(Ce) and TLYC(Ce) SiPM-Based Radiation Detectors in Mixed Radiation Fields with Geant4

MONTE CARLO CALCULATION AND COMPARISON OF GAMMA/NEUTRON DISCRIMINABILITY OF SOME SCINTILLATORS

Precise Monte Carlo simulation of gamma-ray response functions for an NaI(Tl) detector

Gamma Spectrum and Coincidence Summation Simulations with Geant4 in the Analysis of Radionuclide Using BEGe Detector.

Detection Efficiency Calculations Using Geant4 for a Broad-Energy Germanium Gamma Spectrometer

Monte Carlo Simulation of a PhosWatch Detector Using Geant4 for Xenon Isotope Beta–gamma Coincidence Spectrum Profile and Detection Efficiency Calculations

A phoswich design using real-time rise time discrimination for Compton suppression of LaBr3:Ce detector

Development of gamma-spectrum data generation method by Monte Carlo simulation

A Monte Carlo based technique for analysing gamma-ray spectra

Monte Carlo Simulation of Prompt Γ-Ray Spectra from Depleted Uranium under D-T Neutron Irradiation and Electron Recoil Spectra in a Liquid Scintillator Detector

Monte Carlo Study on Detection Efficiency of Seawater Measuring in-situ γ Detectors

Development of a 3” LaBr3 SiPM-Based Detection Module for High Resolution Gamma Ray Spectroscopy and Imaging

A phoswich design using real-time rise time discrimination for Compton suppression of LaBr<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline" id="d1e178" altimg="si26.svg"><mml:msub><mml:mrow /><mml:mrow><mml:mn>3</mml:mn></mml:mrow></mml:msub></mml:math>:Ce detector

Ground-based calibration and characterization of LaBr3-SiPM-based gamma-ray detector on GECAM satellite: 8–160 keV

Response of LaBr3:Ce Scintillation Detector Itself to Fast Neutrons

Monte Carlo Simulation of CsI(Tl) Scintillator Detector with GEANT4 ToolKit

Monte Carlo Simulation of Ultra-high Resolution γ Detector

Optimal Design for a Μbq/kg Gamma Spectrometer Based on Monte Carlo Simulation