Abstract:Transmission X-ray security scanners are deployed to detect smuggling of contraband articles, including weapons, narcotics, and explosives, for the purposes of homeland security. Current X-ray scanners use a fixed tube voltage (i.e., 160 kV); hence, they have a limitation in detecting thinly coated and/or low-density objects. To overcome this limitation, we are developing an X-ray scanner that applies variable tube voltage according to the physical/chemical properties of the object being inspected. To this end, in our previous study, Monte Carlo simulations with Geant4 (GEometry ANd Tracking4) and MCNP (Monte Carlo N Particle) were performed to optimize the design of the X-ray scanner for variable tube voltages. The MCNP was used to simulate the radiation generator for the X-ray source term, and the Geant4 was used to optimize the design of the dual-energy detector and to obtain the detector counts. In the present study, we experimentally validated the reliability of the Monte Carlo simulation model for the X-ray scanner. An 241 Am source and a radiation generator were employed in this validation. For the 241 Am source, the dual-energy detector signal was measured at a distance of 1 cm from the detector. In the case of the radiation generator, the source-to-object distance and the source-to-detector distance were 70 cm and 120 cm, respectively, as used in a typical X-ray security scanner. The tube voltage and the current were 140 kV and 10 mA, respectively. To obtain the X-ray images, the object was scanned while moving at a speed of 0.2 m/s on a conveyor system. The X-ray source term used in the simulation was obtained by monoenergetic-electron-beam bombardment onto the target. 4-D simulations were performed for the moving object. To validate the simulation model, we compared the simulated and measured image profiles, as well as the pixel counts of the dual-energy detector. The percent differences between the simulated and measured pixel counts and the image profiles were all within 5%. Thus, we concluded that our simulation model for the X-ray scanner can be considered to be reliable.

Development of gamma-spectrum data generation method by Monte Carlo simulation

A Simulation Study on the Flash X-Ray Spectra Spatial Distribution

A Monte Carlo based technique for analysing gamma-ray spectra

Monte Carlo Simulation of a PhosWatch Detector Using Geant4 for Xenon Isotope Beta–gamma Coincidence Spectrum Profile and Detection Efficiency Calculations

Modeling gamma detectors in OpenMC: Validation of a newly implemented pulse-height tally

Gamma Spectrum and Coincidence Summation Simulations with Geant4 in the Analysis of Radionuclide Using BEGe Detector.

Development of a direction-sensitive gamma-ray monitoring system using a gamma camera with a dual-sided collimator: A Monte Carlo study

Monte Carlo Simulations of the GE Discovery Alcyone CZT SPECT Systems

Experimental validation of Monte Carlo simulation model for X-ray security scanner

Monte Carlo Simulation of Ultra-high Resolution γ Detector

Monte Carlo simulation of gamma-ray spectra using a LaBr3 detector

Simulation of gamma spectra from soil samples by using MCNP: A case study

Advanced Monte Carlo simulations of emission tomography imaging systems with GATE

Development of a fast simulator for GEM-based neutron detectors

Design and Optimization of A Dual-Hpge Gamma Spectrometer and Its Cosmic Veto System

A Hybrid Monte Carlo Model for the Energy Response Functions of X-Ray Photon Counting Detectors

MCPSim: A Geant4-based generic simulation toolkit for electron multipliers represented by Microchannel Plate

Modelling the Response of CLLBC(Ce) and TLYC(Ce) SiPM-Based Radiation Detectors in Mixed Radiation Fields with Geant4

Monte Carlo Studies of Micromegas As a Neutron Detector and Its Track Reconstruction

Geant4-Based Monte Carlo Simulator for Fan-and Cone-Beam X-ray CT

Detection Efficiency Calculations Using Geant4 for a Broad-Energy Germanium Gamma Spectrometer