Abstract:The NaI(Tl) detector has become the main way of research and application of in-situ radioactivity measurement in the marine environment due to many advantages on detection efficiency, power consumption, cost and applicability. But for the poor energy resolution and there is a high background in the low energy region of the spectrum measured mainly originating from the Compton scattering of natural radionuclides such as 40K with high concentrations in seawater, it is difficult and also an interesting topic for NaI(Tl) detector to identificate the radionuclides and calculate them in seawater by analyzing the spectra measured. In this paper, an in situ NaI(Tl) detector developed for the marine environment was energy, resolution and efficiency calibrated. The detection response matrix was calculated by taking all the responsible processes and interactions of gamma rays in water as well as in the detector into account using Monte Carlo simulation method. And then an improved Richardson-Lucy (R-L) deconvolution algorithm was proposed to reconstruct the gamma spectrum measured in the seawater to remove as efficiently as possible the background counts into the corresponding photopeaks. The original spectrum was transformed from poor energy resolution to the corresponding deconvolution spectrum of the high energy resolution with several isolated photopeaks. The experiments of synthetic spectrum and measured spectrum both showed promising results for the radionuclide qualitative and quantitative analysis.

Monte Carlo simulation of in situ LaBr gamma-ray spectrometer for marine environmental monitoring.

Monte Carlo Study on Detection Efficiency of Seawater Measuring in-situ γ Detectors

Monte Carlo Simulation of in Situ Gamma-Spectra Recorded by NaI (tl) Detector in the Marine Environment

Optimization of an underwater in-situ LaBr3:Ce spectrometer with energy self-calibration and efficiency calibration

Energy Self-calibration and Low-Energy Efficiency Calibration for an Underwater In-Situ LaBr3:Ce Spectrometer

A Prototype of LaBr3:Ce in situ Gamma-Ray Spectrometer for Marine Environmental Monitoring

In-Situ Seawater Gamma Spectrometry with LaBr3 Detector at a Nuclear Power Plant Outlet

Monte Carlo simulation of gamma-ray spectra using a LaBr3 detector

In-situ Gamma-spectrum Measurement for Marine Radioactivity near the Coastal Nuclear Power Plants

Automated spectra analysis of in situ radioactivity measurements in the marine environment using NaI(Tl) detector

Modelling the Response of CLLBC(Ce) and TLYC(Ce) SiPM-Based Radiation Detectors in Mixed Radiation Fields with Geant4

Marine Radioisotope Gamma-Ray Spectrum Analysis Method Based on Geant4 Simulation and MLP Neural Network

Characterization of a CZT-based spectrometer for underwater operation via simulations and experiments

Monte Carlo N-Particle simulations of an underwater chemical threats detection system using neutron activation analysis

Development of a Seawater Radioactivity Monitoring System and Its Preliminary Test Results

Monte Carlo simulations of the SNM spectra for CZT and NaI spectrometers

Response of LaBr3:Ce Scintillation Detector Itself to Fast Neutrons

Characterization of a medium-sized CLLB scintillator: single neutron/gamma detector for radiation monitoring

Monte Carlo Simulations of Airborne Gamma Spectrometry of Radionuclide in Earth

New approach to study the response of portable gamma detector for in-situ measurement of terrestrial gamma ray field

Simulation of gamma spectra from soil samples by using MCNP: A case study