Abstract:We have attempted to apply the computer-based finite element analysis (FEA) method to accurately measure the mechanical properties (e.g., hardness and elasticity) of a soft material by an indentation test. First, an axisymmetric model has been developed using commercially available FEA code ANSYS. The FEA model consisted of a thin Al-film resting on Si-substrate. A spherical indenter has been used to indent the Al-film, which traveled a predefined depth during the loading and unloading cycles. First, numerical simulations were conducted to get the force vs. displacement plot, which was later used to determine the modulus of elasticity and hardness of Al-film. The effects of substrate modulus and indentation depth were thoroughly investigated to determine the modulus and hardness of Al-film. The effect of friction, considered at the interface of indenter and Al-film, was found to offer minimum impact for relatively small indentation depth. The induced force on the Al-film by the indenter has been found to be higher with increasing indentation depth when friction was considered. However the contact stiffness, represented by the slope of the unloading curve, has been found almost the same with and without considering friction. The variation of substrate modulus has been found to be ineffective to capture the Al-film modulus for relatively small indentation depth. However for higher indentation depth, the substrate modulus has been found to offer profound effect to capture the film modulus. The hardness of the Al-film has also been found to be relatively unaffected with variation of substrate modulus. However, the hardness of the Al-film has been found to be higher with friction for relatively high indentation depth. Results obtained from this preliminary research are important to continue further investigation and to characterize the mechanical properties of other soft-materials, e.g., biofilms to minimize its detrimental effects and utilize its favorable aspects in industrial and biomedical applications.

Nano hardness measurement by static indentation and Asia-Pacific interlaboratory comparison

Nanohardness by Nanoindentation

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

Comparison of nano-indentation hardness to microhardness

The calibration and test about nanomechanical test equipment

An Improved Work-Of-Indentation Approach For The Determination Of Hardness From Nanoindentation Tests

Application of Nanoindentation Tests in the Research of Nanomaterials

Measurement of hardness and elastic modulus by load and depth sensing indentation: Improvements to the technique based on continuous stiffness measurement

THEORETICAL METHODS ON NANOINDENTATION

Automatic and Accurate Measurement of Microhardness Profile Based on Image Processing

Nano-Indentation for Characterizing Mechanical Properties of Soft Materials

Description of the Nanoindentation Unloading Curves with a Universal Function: Theoretical Consideration and Applications to Brittle Materials

Nanomechanical Properties of Tooth and Bone Revealed by Nanoindentation and Afm

Nanohardness measurement of single crystal copper with the quasicontinuum method

Self-calibration of Area Function for Mechanical Property Determination with Nanoindentation Tests

Indentation Depth-Dependent Hardness of Metal-Organic Framework Crystals: the Effect of Local Amorphization Induced by Indentation

Development of a micro-indentation device for measuring the mechanical properties of soft materials

Determining mechanical properties of thin film in packaging structures by in-situ nanoindentation

Determination of the Load-Independent Hardness by Analyzing the Peak-Load-Dependence of the Unloading Slope in Nanoindentation

Nano-level Indentation Hardness Test of PMMS Film with AFM

Nanomechanical characterization of human fingernail using nanoindentation and AFM