Abstract:We report a digital control architecture that demodulates both amplitude-modulated (AM) and frequency-modulated (FM) rate information simultaneously from a gyroscope working in Lissajous frequency-modulated (LFM) mode. The angular rate information is derived from both quadrature (X and Y) resonance modes of the gyroscope simultaneously. A noise model for the AM signal processing channel of the LFM gyroscope is built, analyzed and compared with that of a conventional AM gyroscope, which shows that methods to improve the performance of the conventional AM gyroscope can also be applied to the AM signal processing channel of the LFM gyroscope. The angular rate output obtained from the AM information of the LFM gyroscope has better noise characteristics, which therefore supplements the low precision inadequacy of the FM signal channel of the LFM mode. Tests on the same gyroscope working in different control architectures are conducted. The angle random walk (ARW) and bias instability (BI) of the AM channel of the proposed architecture are 0.51 deg √h−1 and 1.8 deg h−1, respectively, which are better than the results obtained from the FM channel in the same architecture, with values of 0.99 deg √h−1 and 4.3 deg h−1, respectively. Also ARW amd BI of the same gyroscope working in conventional AM mode is 0.50 deg √h−1 and 5.2 deg h−1, respectively.

Error analysis on numerical double integration in acceleration measurement with clock jitter

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

Effect on Pseudo Code Ranging Precision by A/D Sampling Clock Jitter

Effect of Processing Rate on Regenerative Clock Jitter Performance in Pseudo-Random Code Ranging

Noise Analysis and Modeling for a Digital Control Architecture for Lissajous Frequency-Modulated MEMS Gyroscope with Amplitude-Modulated Readout

Investigation of Heterodyne Interferometer Technique for Dynamic Angle Measurement: Error Analysis and Performance Evaluation

Effect of Chip Rate on the Ranging Accuracy in A Regenerative Pseudo-Noise Ranging System

Evaluation of measurement uncertainty in H-drive stage during high acceleration based on Monte Carlo method

Precision tilting platform used for static calibration of accelerometers

Simulation Research on Jitter Measurement Using CDF of ADC Output Code

Clock Jitter Measurement Method

Analysis And Study On Measurement Of Jitter And Its Precision

Measurement of Clock Jitter and Distribution with Pico-Second Resolution Using ADC

Research of Clock Pulse Interpolation Technology Based on Constant Acceleration Model

An Improved Algorithm for Q-scale Analysis in Jitter Decomposition

Research on Acceleration Integration Error Correction Algorithm and Its Applicability

New method for accurate measurement of clock jitter based on equivalent-time sampling

Clock jitter measurement technique based on signal-to-noise ratio

Study of Single-cycle Jitter Error in High-precision Pulsed Laser Velocity Measuring

Clock noise evaluation of space-based gravitational wave detectors based on time-delay interferometry

A Survey of Error Analysis and Calibration Methods for MEMS Triaxial Accelerometers