Abstract:For modern equipment manufacturing industries, advanced manufacturing technologies have significant impact on the production quality and efficiency. Specifically, high-speed and high-accuracy technology is widely used in aerospace, automotive, and power-generation equipment to reduce the processing costs and improve the machining accuracy. However, the traditional velocity planning methods cannot satisfy the requirements of advanced equipment in point-to-point movement occasions. To solve these problems, a novel S-curve acceleration and deceleration (Acc/Dec) control model is proposed in this study, and the discretization of the Acc/Dec process was investigated. Furthermore, the derivation of the actual interpolation periods of each segment, actual achieved Acc/Dec, and actual achieved jerk of Acc/Dec zone are addressed in detail. To ensure the positioning accuracy and reduce the computational load, discrete formulae for the deceleration displacement, maximal achieved speed, and displacement of the constant acceleration segment are derived. To satisfy the product diversification and improve the efficiency, the function of the aforementioned S-curve Acc/Dec control algorithm was extended in this study. As a result, the end-point modification and target speed modification algorithms were developed. Finally, a series of numerical simulations and a real experiment were conducted. The results show that the proposed algorithms exhibit a good performance both in terms of reliability and efficiency. Thus, its feasibility was validated.

Research of Clock Pulse Interpolation Technology Based on Constant Acceleration Model

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Research on Cubic Polynomial Acceleration and Deceleration Control Model for High Speed NC Machining

Research on a New S-curve Acceleration and Deceleration Control Method

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

Optical Accelerometer Based On Grating Interferometer With Phase Modulation Technique

The application of natural neighbor interpolation in real-time environments

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Research on Flexible Acceleration and Deceleration Method of NC System

High Acceleration Ultra-Precision Measurement Model in Laser Heterodyne Interferometry

Research on New Software Compensation Method of Static and Quasi-Static Errors for Precision Motion Controller

Design of Optimal Fast Scanning Trajectory for the Mechanical Scanner of Measurement Instruments

Ratiometric-Linearization-Based High-Precision Electronic Interpolator for Sinusoidal Optical Encoders

A Clock Drift Compensation Method for Synchronous Sampling in Sensor Networks

Time Interpolation Based on Delayed Event and Primary Clock Signals

Improving the interpolation accuracy of optical encoders via noise suppression and signal correction

The Implementation and Experimental Research on an S-curve Acceleration and Deceleration Control Algorithm with the Characteristics of End-Point and Target Speed Modification on the Fly

Effect on the measurement precision of a multi-pass heterodyne interferometer by an acceleration and compensation method

Clock Synchronization Based on Non-Parametric Estimation Considering Dynamic Delay Asymmetry

Dynamic Error Modeling and Compensation of a Scanning Probe on CMM