Abstract:In micro-electrical discharge machining (micro-EDM) using the non-hollow circular cross-section tool electrode with the side flushing technique, when the aspect ratio of machined micro-hole is expected to be further increased, the discharge debris expelling speed and the working fluid renewal efficiency are weakened, which hinders the improvement of machining efficiency and accuracy with increased machining depth. In order to reveal the flow behavior of the working fluid in the micro-EDM gap, so as to realize the high-precision and high-efficiency machining of micro-hole with high aspect ratio, a three-phase flow simulation model of fluid, bubble, and debris is established in Fluent under the ideal assumption that the spark discharges occur continuously to generate high-pressure bubbles. The simulation results show that when the boundary condition of the flushing pressure at the side gap entrance is set to 0, the pressure wave emitted when the high-pressure bubble expands, which is formed by the instantaneous gasification of the working fluid between electrodes under high temperature, is the source of pneumatic force that drives the working fluid flow at the micron scale. Affected by the gap flow channel structure and the viscous resistance from inner wall, the flow velocity direction of the fluid dragging the discharge debris to rise up and expel will change, forming a dynamic alternation process of flowing into and out of the side machining gap entry. As the machining depth increases, due to the energy attenuation of the pressure wave propagating from the bottom gap to the side gap entrance, the expelling speed of the discharge debris decreases exponentially at the side gap entrance, resulting in the reduced machining efficiency and accuracy. However, when the simulated bubble generation frequency is increased to the megahertz level, the expelling efficiency of debris has a step-like improvement. The continuous and high-frequency generation of high-pressure bubbles can maintain a high pressure gradient in the bottom gap, and the discharge debris is able to continuously move upward without falling back to accumulate in the bottom gap, which is beneficial to the stable and smooth machining process, realizing the high-precision and high-efficiency machining of micro-hole with high aspect ratio.

Rapid EDM systems for micro and small holes with high-aspect-ratio

Development of EDM Equipment for Machining Film Cooling Holes

Research on the Key Technologies of Micro Electro Discharge Machining

Micro Electro Machining Technologies for Industrial Application

A High Energy Density Pulsed Power Supply for Micro EDM of High Aspect Ratio Holes

Mechanism design and process control of micro EDM for drilling spray holes of diesel injector nozzles

Servo scanning 3D micro-EDM based on macro/micro-dual-feed spindle

High-speed Near Dry Electrical Discharge Machining

Vibration-Assisted Servo Scanning 3d Micro Edm

CAD/CAM Integration System of 3D Micro EDM

Development of Tool Electrode High Frequency Vibration Assisted Micro-Hole EDM Machine for Industry Environment

Development of a high precision tabletop versatile CNC wire-EDM for making intricate micro parts

Performance improvement of high-speed EDM and ECM combined process by using a helical tube electrode with matched internal and external flushing

Design of a Micro-hole EDM Tool and its Machining Experiments

Improvement of ultrasonic cavitation and pumping effect in microhole EDM

Design of Electromechanical Control System of EDM for Drilling Micro Nozzles

Interelectrode gas–liquid-solid three-phase flow analysis and simulation for drilling holes with high aspect ratio by micro-EDM

Dielectric Flushing Optimization of Fast Hole EDM Drilling Based on Debris Status Analysis

Micro-EDM of micro-stepped hole based on the wear of micro-bit

Precision EDM of Micron-Scale Diameter Hole Array Using in-Process Wire Electro-Discharge Grinding High-Aspect-Ratio Microelectrodes

Study of electrode feeding method for EDM hollowing