Abstract:In recent years, piezoelectric actuators, represented by inertial and inchworm actuators, have been widely applied because of their high accuracy and excellent responsiveness. Despite the development of various piezoelectric actuators, there remain some flaws in this technology. The sticking point is that the piezoelectric actuators based on the friction driving principle are prone to unwanted backward motion when outputting stepping motion. It is thus urgent to explore solutions from the perspectives of principle and structure. In this paper, a clamping-drive alternating operation piezoelectric actuator is proposed, the two feet of which are driven by two piezoelectric stacks, respectively. Due to double-foot alternate drive guide movement, backward movement is prevented in theory. By adopting the double-layer stator structure, integrated processing and assembly are facilitated. Meanwhile, a double flexible hinge mechanism is installed in the stator to prevent the drive foot from being overturned due to ineffectiveness and premature wear. In addition, the stator is equipped with the corresponding preload mechanism and clamping device. After the cycle action mechanism of one cycle and four steps is expounded, a model is established in this study to further demonstrate the principle. With the prototype produced, a series of experiments are performed. In addition, the amplitude of actuation of the stator is tested through amplitude experiment. The performance of the stator is evaluated by conducting experiments in the alternating step and single step actuation modes. Finally, the test results are analyzed to conclude that the actuator operating in either of these two modes can meet the practical needs of macro and micro actuation.

New Type of Actuate-Motion Mechanism with Giant Magnetostrictive and Piezoelectric Drive

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

Linear Inchworm Mechanism Based on Giant Magnetostrictive and Piezoelectric Materials

Study on control of giant magnetostrictive piezoelectric hybrid actuator

A Novel Inertial Micro-Actuator and Its Application in Positioning Mechanism

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

A New Piezoelectric Linear Actuator

Design and Control of Giant Magnetostrictive Actuator for Long-stroke Precision Positioning

Research for A New Actuator with Variable Step and Large Displacement

Design and Experiment of a Clamping-Drive Alternating Operation Piezoelectric Actuator

A Four-Foot Walking-Type Stepping Piezoelectric Actuator: Driving Principle, Simulation and Experimental Evaluation

Development of a Nonresonant Piezoelectric Motor with Nanometer Resolution Driving Ability

Development and Test of a Multimode Piezomotor with Active Contact Force Adjusting

Design and Experimental Evaluation of a Novel Stepping Linear Piezoelectric Actuator

Design, analysis and experimental performance of a stepping type piezoelectric linear actuator based on compliant foot driving

Design and Analysis of a Novel Piezoelectric Inertial Actuator with Large Stepping Displacement Amplified by Compliant Mechanism

The High Resolution Actuator Based on Giant Magnetostriction

The Working Principle and Excitation Method of A Step Peristalsis Piezoelectric Actuator

Design and Experimental Investigation of a Novel Stick-Slip Piezoelectric Actuator Based on V-shaped Driving Mechanism

Multi-DOF and Sub-Micrometer Piezoelectric-Electrorheological Stepper Motor

A giant magnetostrictive actuator based on use of permanent magnet