Abstract:In recent years, piezoelectric actuators, represented by inertial and inchworm actuators, have been widely applied because of their high accuracy and excellent responsiveness. Despite the development of various piezoelectric actuators, there remain some flaws in this technology. The sticking point is that the piezoelectric actuators based on the friction driving principle are prone to unwanted backward motion when outputting stepping motion. It is thus urgent to explore solutions from the perspectives of principle and structure. In this paper, a clamping-drive alternating operation piezoelectric actuator is proposed, the two feet of which are driven by two piezoelectric stacks, respectively. Due to double-foot alternate drive guide movement, backward movement is prevented in theory. By adopting the double-layer stator structure, integrated processing and assembly are facilitated. Meanwhile, a double flexible hinge mechanism is installed in the stator to prevent the drive foot from being overturned due to ineffectiveness and premature wear. In addition, the stator is equipped with the corresponding preload mechanism and clamping device. After the cycle action mechanism of one cycle and four steps is expounded, a model is established in this study to further demonstrate the principle. With the prototype produced, a series of experiments are performed. In addition, the amplitude of actuation of the stator is tested through amplitude experiment. The performance of the stator is evaluated by conducting experiments in the alternating step and single step actuation modes. Finally, the test results are analyzed to conclude that the actuator operating in either of these two modes can meet the practical needs of macro and micro actuation.

Study on control of giant magnetostrictive piezoelectric hybrid actuator

The Research on the Improvement of the Dynamic Output Characteristics of Giant Magnetostrictive Actuator

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

Precision Servo Control of GMA Based on Compounding Feedforward Compensation

Study on design approach of giant magnetostrictive actuator

Modeling And Control Method Study Of Magnetostrictive Micropositioner And Its Application

Experimental Research on Output Performances of Giant Magnetostrictive Actuator

Design and Control of a Piezoelectric Ceramic-actuated and Flexure Hinge-based Micromanipulator

Simulation and Experimental Study of the Coupling Drive Magnetic Field for Embedded Giant Magnetostrictive Actuators

New Type of Actuate-Motion Mechanism with Giant Magnetostrictive and Piezoelectric Drive

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Linear Inchworm Mechanism Based on Giant Magnetostrictive and Piezoelectric Materials

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

Study on Giant Magnetostrictive Actuator Based on Disk-Shape Diaphragm Compliant Structure

Design and Locomotion Study of Two-DOF Actuator Driven by Piezoelectric–Electromagnetic Hybrid Mode

Study on Giant Magnetostrictive Microdisplacement Actuator Having the Function of Sensing Its Displacement

A piezoelectric inchworm actuator of linear type using symmetrical lever amplification

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Design and Experiment of a Clamping-Drive Alternating Operation Piezoelectric Actuator

A piezoelectric inertial actuator operating with elliptical drive and stick-slip drive modes

Design and experimental evaluation of an inchworm motor driven by bender-type piezoelectric actuators