Abstract:The high-strength materials are increasingly used in the concrete-filled steel tubular (CFST) column to improve its mechanical behaviors. This study aims to evaluate the fundamental behavior of high-strength concrete-filled high-strength square steel tubular (HCFHSST) long columns under eccentric compression. A series of tests were conducted on eccentrically loaded HCFHSST long columns to investigate the mechanical characteristics and failure mechanisms. Numerical investigations were systematically performed to explore the load-carrying performance of the column. Meanwhile, parametric studies were implemented to evaluate influences of several key parameters on the strength increase factor (SIF), P–M, and P/P0–M/M0 curves of the HCFHSST members, respectively. Furthermore, the equations were proposed to predict the peak-loads of HCFHSST long columns under eccentric loading. The experimental and simulated peak-loads were compared with the results of various design codes and recommended equations to assess the feasibilities of those calculation systems. The results demonstrated that the bending moment–curvature curves of the experimental specimens could be categorized into three types considering the second-order effect. Additionally, it was numerically observed that using high-strength steel can enhance the yield load proportion of the column, and the concrete withstands most of the applied load when utilizing high-strength concrete as infill. Based on the peak-load calculations of codes EC4, AISC 360, and GB 50936, it was found that code GB 50936 presented a better result on average while was unsafe for some cases with high e/B ratios. The equations proposed in this study can provide an improved prediction and hence are suggested.

Experimental behaviour of slender circular concrete-filled stainless steel tubular columns under axial compression

Behaviour of Short and Slender Concrete-Filled Stainless Steel Tubular Columns

Behavior and Design of Slender Concrete-Filled Wide Rectangular Steel Tubular Columns under Axial Compression

Behaviour of Slender Square Concrete-Filled Stainless Steel Columns Subject to Axial Load

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Axial Compression Behaviour of Circular Concrete-Filled Stainless-Clad Bimetallic Steel Tubular Stub Columns

Experimental Studies On The Strength With High Slenderness Ratio Concrete Filled Steel Tubular Columns

Experimental Behavior of Concrete-Filled Stainless Steel Tubular Columns under Cyclic Lateral Loading

Experimental Behaviour of Concrete-Filled Stiffened Thin-Walled Steel Tubular Columns

Experimental and numerical behavior of eccentrically loaded square concrete-filled steel tubular long columns made of high-strength steel and concrete

Nonlinear analysis of concrete-filled square stainless steel stub columns under axial compression

Experimental behavior of concrete-filled double-skin tubular columns with outer galvanized corrugated steel tubes under axial compression

Performance of steel-reinforced square CFST stub columns loaded in axial compression: Experiments

Strength, Stiffness and Ductility of Concrete-Filled Steel Columns under Axial Compression

Analysis and Design of Concrete-Filled Stiffened Thin-Walled Steel Tubular Columns under Axial Compression

Experimental behaviour of high performance concrete-filled steel tubular columns

Experimental Study on Axial Compression Performance of Thin-Walled Steel Tube Lightweight Concrete Columns With Composite Section

Experimental study on square concrete-filled double skin steel tubular short columns

Compressive behaviour of circular CFDST short columns with high- and ultrahigh-strength concrete

Behaviour and Design Calculations on Very Slender Thin-Walled Cfst Columns