Abstract:Thecost-effective and environment-friendly template of LaMnO 3 /epi-MgO/ion beam-assisted deposited (IBAD-)MgO/solution deposition planarized (SDP) Y 2 O 3 /Hastelloy tape was used as the substrate, on which the technique of metal organic chemical vapor deposition (MOCVD) has been applied to depositing 1.2- μ m-thick YBa 2 Cu 3 O 7− x (YBCO) films by modulating the substrate temperature ranging from 750 to 850 ∘ C. The effects of substrate temperature on the preferential orientation, textures, surface morphology, and performance of the YBCO films were systematically investigated. X-ray diffraction and scanning electron microscope revealed that as substrate temperature increased from 750 to 810 ∘ C, the orientation of YBCO films was transferred from the a -axis to the c -axis; meanwhile, the textures were improved and the films became denser. However, as the substrate temperature rose above 810 ∘ C, the composition distributions and textures of YBCO films degraded quickly, and the films were barium-poor with CuYO 2 impurity arising, of which all negatively affected the critical current density ( J c ) of YBCO films. Around 810 ∘ C, the YBCO film was of the best crystallization and microstructure as well as highly epitaxial growth, leading to the highest J c of 1.8 MA/cm 2 at 77 K and self-field.

Effect of air humidity on the microstructure and properties of large-area YBa2Cu3O7-x films by TFA-MOD process

Influence of Water Vapor Pressure on Superconducting Properties of YBCO Film by TFA-MOD

Microstructure and superconducting properties of (BaTiO3, Y2O3)-doped YBCO films under different firing temperatures

Effect of Fired Temperature on Microstructure and Superconductivity of MOD-YBCO Thin Films

Study on the growth of YBCO films deposited by TFA-MOD method

Effect of Annealing Time on the Structure and Properties of YBCO Films by the TFA–MOD Method

Preparation of YBa2Cu3O7−δ Films by MOD Method Using Trifluoroacetate As Precursor

High-resolution XRD study of stress-modulated YBCO films with various thicknesses

Effects of Precursor Solution Concentration on the Properties and Morphology of Ybco Films Deposited by Tfa-Mod Method

Decomposition and Oriented Growth of Yba2cu3o7-X Films Prepared with Low Fluorine Tfa-Mod Approach

Temperature-Modulated Growth of MOCVD-Derived YBa2Cu3O7−x Films on IBAD-MgO Templates

Study on the growth of YBCO films deposited by rapid pyrolysis process TFA-MOD

Effects of BaCO3 in transient liquid-assisted fluorine-free metal organic deposition on the growth process of YBCO

Epitaxial Growth of Mocvd-Derived Ybco Films by Modulation of Cu(Tmhd)(2) Concentration

Study on the growth rate of YBCO films prepared by TFA-MOD

Polymer Assisted Thick Single-Layer YBa 2 Cu 3 O 7-Δ Films Prepared with Modified TFA-MOD Method

Influence of Annealing Time on 5-Layer YBa2Cu3O7-δ Thick Films by Low-Fluorine Metal-Organic Deposition

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method

YBCO Superconducting Film Coated on LaAlO 3 Substrate by TFA-MOD Process

Surface Morphology and Profile Analysis for Five-Layer YBa 2 Cu 3 O 7− Δ Thick Films Prepared by Low-Fluorine Metallorganic Deposition

Precursor evolution and growth mechanism of BTO/YBCO films by TFA—MOD process