Abstract:System overvoltages in the renovated ±500 kV DC power transmission project from Tianshengqiao to Guangzhou under four typical fault conditions,i.e.,single-phase grounding occurred at upper-half rectifier bridge side of wye-wye connected winding of converter transformer,interphase switching surge from AC system,loss of AC power supply occurred at inverter side and inverter being blocked with unblocked bypass pairs,are analyzed and computed to ensure overvoltage at different positions in the grid as well as energy consumption of arresters can be restricted within rational ranges by renovated control and protection system,thus the secure operation of all power equipments can be implemented.Analysis results show that higher overvoltages will appear at neutral-bus due to single-phase grounding occurred at valve side of wye-wye connected winding of converter transformer,and the energy consumption of neutral-bus arrester will also be higher;higher overvoltage will appear at the terminals of rectifier valves due to interphase switching surge from AC system and it makes valve arrester operated;higher overvoltage will occur at AC bus of inverter station due to the loss of AC power supply at inverter side and it makes AC bus arrester operated;a rather high overvoltage will appear on DC polar line at inverter side due to inverter being blocked with unblocked bypass pairs and it makes a high energy consumption of arrester of DC polar line.The energy consumption of all arresters does not yet exceed the designed discharging capability under these four fault conditions,thus secure and stable operation of all arresters can be ensured.

Overvoltage Protection of High Power IGBTs in Wind Power Converters under Short Circuit

Research on High Power IGBT Short Circuit Protection in Wind Power System

Fault Analysis and Fault-Tolerant Design for Parallel Redundant Inverter Systems in Case of IGBT Short-Circuit Failures

A High Speed Short-Circuit Protection Circuit with Current Limitation and Soft Turn-Off for High Power IGBTs

High Power Snubberless IGBT Converter for Direct-Drive Wind Power Generation System

Fault Analysis on Conventional Parallel Inverter Systems

Active Gate Control for High Power Igbts in Wind Power Generation System

Method of drive and rapid protection for high power IGBTs

Advanced Active Gate Drive for Switching Performance Improvement and Overvoltage Protection of High-Power IGBTs

Self-adaptive Multi-Stage IGBT Driving Method in Medium Voltage Wind Generation System

A discussion on IGBT short-circuit behavior and fault protection schemes

Analysis on Overvoltage in Renovated Control and Protection System for HVDC Power Transmission Project from Tianshengqiao to Guangzhou

Study of Accelerated Power Cycling Test of IGBT Power Modules

Study on the Over-Voltage and Over-Current of Grid-Connected Inverters in Non-Fault Conditions

Adaptive Thermal Control for Power Fluctuation to Improve Lifetime of IGBTs in Multi-Mw Medium Voltage Wind Power Converter

Research on Single-Ended Protection for Wind Power Full-DC Transmission System Based on Generalized S Transform

Adaptive Digital Drive for High Power and Voltage IGBT in Multi-Mw Wind Power Converter

Design and Implementation of the Compact Main Circuit of IGBT-based Converter

Study of the Protection and Energy Transmission Modes of One Phase Short Circuit to Ground in Inverters

Modeling and Control of a Novel Experimental Method for High Power Wind Power Converter

Investigation and Emulation of Junction Temperature for High-Power IGBT Modules Considering Grid Codes