Abstract:Conduction laser welding involves initiating a melt pool by exposure to high power laser induced light and controlled thermal conduction. Existing welding techniques generally provide enough energy to join the component but have no real control over the melt pool. This process can invariably lead to over heating in adjacent areas or even the melt pool itself, often causing unavoidable issues. This work presents a procedure in which a desired melt pool shape is conceived, and a bespoke beam irradiance distribution is designed to match. The beam is shaped, not by conventional lenses, but by a diffractive optical element (DOE). The DOE utilises holography to wholly create a highly complex three dimensional energy distributions through constructive and destructive interference. This technique allows novel beam irradiance distributions to be applied to conduction mode laser welding, with which the melt pool transverse profile has been shaped to a specific design. Holographic conduction laser welding has been shown to be successful and represents a significant step forward in the industry, demonstrated in this case in both mild and stainless steel. The fusion zone is shown to be particularly influenced by the shape of the illuminating laser beam profile, and many of the welds demonstrate a highly novel weld profile because of this. The use of a bespoke beam irradiance distribution allows the user to control the heat flow to the workpiece, and this allows greater control over material migration due to surface tension effects. Many of the welds demonstrate unique surface solidification patterns directly linked to the beam profile used. The DOE also presents a number of additional advantages, such as an increased usable depth of field, allowing for less stringent set up tolerances for example. Comprehensive metallography has been performed on samples of these welds through the use of optical microscopy, electron microscopy, electron backscatter diffraction (EBSD) and energy dispersive spectroscopy (EDS). These techniques offer in depth analysis of crystal size, shape, orientation and phase. By incorporating DOE's into a laser welding process, not only does the melt pool shape become controllable, but also the crystal growth is highly influenced. Many of the undesirable attributes of a conventional laser weld are reduced by using a beam distribution created by a DOE, bringing the microstructure of the weld pool closer to that of the parent material.

Design and analysis of diffractive optical element on laser transmission welding based on diffraction

Improving Diffraction Efficiency of DOE in Wide Waveband Application by Multilayer Micro-Structure

A Method to Design Encoded Diffractive Optical Element for Dynamic Pattern Generation

The Research on Improving the Characteristics of Laser Output with Diffractive Optical Elements

Melt pool and microstructure manipulation using diffractive holographic elements in high power conduction laser welding

Numerical and experimental investigation on laser transmission welding of fiberglass-doped PP and ABS

Thermal Analysis of the Laser-Induced Thermal Deformation of a Diffractive Optical Element in a Single-Aperture Coherent Beam Combining System

Designing Diffractive Optical Elements with Subwavelength Features As an Uniform Beam Shaper

Design And Manufacture Of Continuous Phase Diffractive Optical Element For Beam Transform

Design and Test of Laser Transmission Welding System for Automotive Plastic Parts

End-to-End Design of Diffractive Optical Elements Fabricated by Direct Laser Writing Lithography

Designing Diffractive Optical Elements for Special Functions Using a Rigorous Method

Microstructure Characteristics and Mechanical Properties of Fiber-Diode Hybrid Laser Welded 304 Austenitic Stainless Steel

Numerical Study of the Effect of Laser-Arc Distance on Laser Energy Coupling in Pulsed Nd: YAG Laser/tig Hybrid Welding

A new laser welding method of two transparent plastic parts based on reflector assisted method

Development of Large Aperture DOE for Beam Smoothing

Infrared observations and finite element modeling of a laser transmission welding process

Precise Design of Integrated Diffractive Optical Mode Converter for Fiber-to-waveguide Coupling

Mitigating spatters in keyhole-mode laser welding by superimposing additional ring-shaped beam

Continuous Phase Diffractive Optical Element for Uniform Focal Spot

A novel approach to regulate energy allocation and melt flow in narrow gap laser welding with electromagnetic assisted wire wobbling