Abstract:In high power laser system, such as laser forming, the requirement for the intensity distribution of the focused laser profile must be top head, steep edge, low side lobe and concentrated high power performance in the main lobe. Such uniform illumination can be realized by the Diffractive Optical Element(DOE), because the DOE has many advantages, such as high light efficiency of pure phase modulation, strong flexibility of phase distribution design and so on. In some application field, uniform illumination is needed on the plane non-perpendicular to the optical axis and the DOE designed by conventional method which only involves the focal plane is difficult to realize such uniform illumination on the planes which are at angles of 30 degrees,45 degrees,55 degrees with the optical axis. To obtain good illumination uniformity on the inclined plane, based on the method of designing a DOE with long focal depth, an indirect design principle is proposed to realize such uniform illumination, by designing the phase distribution of the DOE to make uniform illumination on three planes at right angles with the optical axis, then the uniform illuminations on the incline planes are assured. A hybrid algorithm based on hill-climbing and simulated annealing is utilized for phase design which exploits the ability of strong convergence of the hill-climbing and the global optimization potential of the simulated annealing sufficiently. Simulated results show the non-uniformity on the incline planes at angles of 30 degrees,45 degrees,55 degrees with the optical axis are 5.91%, 4.00%, 3.38%, respectively.

Test of Diffractive Optical Element for Duv Lithography System Using Visible Laser

Application and Research of Harmonic Diffractive/Refractive Optics in Visible Spectrum

Improving Diffraction Efficiency of DOE in Wide Waveband Application by Multilayer Micro-Structure

Theory and Method of Microstructure Doe As Substitution for Aspheric Surface

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Designing Diffractive Optical Elements with Subwavelength Features As an Uniform Beam Shaper

<title>Continuous-phase diffractive optical element for realizing uniform illumination on the plane nonperpendicular to the optical axis</title>

Designing Diffractive Optical Elements for Special Functions Using a Rigorous Method

Continuous Phase Diffractive Optical Element for Uniform Focal Spot

Design And Manufacture Of Continuous Phase Diffractive Optical Element For Beam Transform

Research on the Design of an Optical Information Storage Sensing System Using a Diffractive Optical Element.

The Research on Improving the Characteristics of Laser Output with Diffractive Optical Elements

Large Aperture Continuous Phase Diffractive Optical Element to Realize Uniform Focal Spot

Multifunctional Diffractive Optics Element for High-Energy Laser System

Development of Large Aperture DOE for Beam Smoothing

End-to-End Design of Diffractive Optical Elements Fabricated by Direct Laser Writing Lithography

Diffractive Optical Element Used for Nd : Yag Laser Beam Smoothing

Broad‐Bandwidth Micro‐Diffractive Optical Elements (laser Photonics Rev. 16(3)/2022)

Design and Quantitative Analysis of Diffractive Optical Element to Realize True Beam Smoothing on an Inclined Plane

Thermal Analysis of the Laser-Induced Thermal Deformation of a Diffractive Optical Element in a Single-Aperture Coherent Beam Combining System

Large Aperture Continuous Phase Diffractive Optical Element for Beam Transform