Abstract:A diffractive micro-optics element with hybrid functions has been designed to perform Inertial Confinement Fusion (ICF). The functions of a lens, a low efficiency beam sampler, a Color Separation Grating (CSG) and a binary optical element for target uniform illumination has been integrated to the diffractive optical element (DOE). Its phase distribution is continuous on a disk with diameter of 45mm. The focal length of element is 2400mm. Sampling efficiency for 3omega(0.351um) light at +1 diffraction order is under 0.1% and the space between sampled beam and focal spot is more than 30mm on the target plane. Unwanted harmonic waves of fundamental wave (1omega) at 1.053 um and second harmonic wave (2omega) at 0.527 um are diverted out of the high power laser system and the remnant ratio of them at zero order are less than 2%. Meanwhile, the micro-optics element has excellent ability for beam uniform. The side lobe of the 3omega focal spot is suppressed very well and the root-mean-square percent error of its top uniformity is less than 1.5%. Although effected by focusing, beam sampling, color separating and beam smoothing, the synthetic efficiency of 3omega light is more than 96%. For the functions integrated diffractive micro-optics element, different designing methods have been applied to implement its corresponding aims. The compatibility, fabrication method and influences between the hybrid functions are discussed in detail.

Broad‐Bandwidth Micro‐Diffractive Optical Elements (laser Photonics Rev. 16(3)/2022)

Broad‐Bandwidth Micro‐Diffractive Optical Elements

Improving Diffraction Efficiency of DOE in Wide Waveband Application by Multilayer Micro-Structure

3D nanoprinting for fiber-integrated achromatic diffractive lens

Fast Method for Designing Broadband Achromatic Diffractive Optical Elements.

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Broadband Highly Efficient Nonlinear Optical Processes in On-Chip Integrated Lithium Niobate Microdisk Resonators of Q-factor above 108

End-to-End Design of Diffractive Optical Elements Fabricated by Direct Laser Writing Lithography

Designing Diffractive Optical Elements for Special Functions Using a Rigorous Method

The Research on Improving the Characteristics of Laser Output with Diffractive Optical Elements

Additive manufacturing of solid diffractive optical elements via near index matching

Direct Laser Writing Breaking Diffraction Barrier Based on Two-Focus Parallel Peripheral Photoinhibition Lithography (vol 4, 066002, 2022)

Multifunctional Diffractive Optics Element for High-Energy Laser System

Design And Manufacture Of Continuous Phase Diffractive Optical Element For Beam Transform

Design of a Hybrid Refractive/Diffractive Lens System for Broadband UV

Vector-based Synthesis of Finite Aperiodic Diffractive Micro-Optical Elements with Subwavelength Structures As Beam Deflectors

Designing Diffractive Optical Elements with Subwavelength Features As an Uniform Beam Shaper

Subwavelength Diffractive Optical Elements

A single diffractive optical element for implementing spectrum-splitting and beam-concentration functions simultaneously with high diffraction efficiency

Hyperbolic Metasurfaces: Hyperbolic Metamaterial Devices for Wavefront Manipulation (laser Photonics Rev. 13(1)/2019)

Design, Fabrication and Analysis of a Hybrid-Order Monolithic Imaging Diffractive Lens on a Germanium Substrate