Abstract:This paper has explored an ultra-low-power design of two 60-GHz direct-conversion receivers in a 65-nm CMOS process for single-channel and multi-channel applications under the IEEE 802.15.3c standard, respectively. One subthreshold biasing 0.4-V transconductance mixer is designed with a compact quadrature hybrid coupler (160 μm × 210 μm with measured 3-dB intrinsic loss) in receivers to achieve low power (8 mW for single channel and 12.4 mW for multi-channel) and high gain (55 dB for single channel and 62-dB for multi-channel). One three-stage low-noise amplifier employs high- Q passive matchings. A double-layer-stacked inductor is utilized for matching in the single-channel receiver and a high-impedance transmission line is utilized for matching in the multi-channel receiver, respectively. In addition, one new modified Cherry-Hooper amplifier is applied for the variable-gain amplifier design to achieve high gain-bandwidth product and high power efficiency. The single-channel receiver is implemented with 0.34- mm2 chip area. It is measured with a power consumption of 8 mW, a minimum single-sideband noise figure (NF) of 4.9 dB, a 3-dB bandwidth of 3.5 GHz, and a maximum conversion gain of 55 dB. The multi-channel receiver is implemented with 0.56- mm2 chip area. It is measured with a power consumption of 12.4 mW, a 3-dB bandwidth of 8 GHz (59.5 ~ 67.5 GHz), and a maximum conversion gain of 62 dB. The measurement results show that the two demonstrated 60-GHz direct-conversion receivers can achieve high gain and low NF with ultra-low power in 65-nm CMOS.

A 1.65 Mw Direct-Conversion Receiver for UHF RFID Readers

A 1.8V CMOS direct conversion receiver for a 900MHz RFID reader chip

A Novel Compact Low-Power Direct Conversion Receiver for Mobile UHF RFID Reader

A Sub-1-GHz Band High-Dynamic-Range Receiver with Integrated Self-Adaptive Multipart AGC Loops

A 1.8V 74mW UHF RFID reader receiver with 18.5dBm IIP3 and −77dBm sensitivity in 0.18µm CMOS

A Sub-GHz CMOS Low-IF Receiver for Lot Applications

Design of a Low Power 60ghz OOK Receiver in 65nm CMOS Technology

High-Linearity Direct Conversion Receiver with the Transconductance Equalization Technique and DCOC Method

A 0.1-1.9Ghz 65nm CMOS Variable-Gain Mixer-First Receiver with DSA and Noise-Shaping TIA.

A 900mhz UHF RFID Reader Transceiver in 0.18&#x03bc;m CMOS Technology

A 900mhz Uhf Rfid Reader Transceiver in 0.18 Mu M Cmos Technology

A Low Power Low Cost Fully Integrated Uhf Rfid Reader With 17.6dbm Output P1db In 0.18 Mu M Cmos Process

A Direct Conversion WLAN Receiver

An 8mw Ultra Low Power 60ghz Direct-Conversion Receiver with 55db Gain and 4.9db Noise Figure in 65nm CMOS

A Low Cost Integrated Transceiver for Mobile UHF Passive RFID Reader Applications

A Mobile UHF RFID Reader with High Linearity Receiver

A Fully Integrated CMOS Transceiver for Mobile UHF RFID Reader

A 90nm CMOS UHF/UWB Asymmetric Transceiver for RFID Readers

A 1 GHz CMOS RF front-end IC for a direct-conversion wireless receiver

A Low Power Direct Conversion Receiver RF Front-End with High In-Band IIP2/IIP3 and Low 1/f Noise

Design of Ultra-Low-Power 60-Ghz Direct-Conversion Receivers in 65-Nm CMOS