Abstract:Due to the high steam velocity and low thermal parameters at the turbine's final stage, steam generates non-equilibrium condensation and forms a large number of small droplets during the process of pressure expansion. The wet steam mixed with droplets impinges on the turbine blades, endangering turbine operation safety and reducing turbine work efficiency. This article modifies the non-equilibrium condensation control equation and embeds it into the numerical simulation software to make the numerical calculation results more accurate. By modifying the inlet steam superheat in the classical experiments, the condensation characteristics of wet steam in Moses–Stein nozzles and Dykas cascades are studied. The results show that increasing inlet superheat can effectively suppress the generation of non-equilibrium condensation and reduce outlet liquid mass fraction. The minimum supercooling temperature of non-equilibrium condensation is only related to the working fluid characteristics (the steam model used in this article is around 20 K). When the inlet superheat of the cascade is large, the rapid condensation region is mainly near the suction surface. In contrast, when the superheat is low, the rapid condensation zone is mainly near the pressure surface. The condensation location is mainly affected by the intensity of internal condensation shock waves in the cascade. Increasing inlet superheat not only increases the shock wave intensity but also decreases the shock wave angle in the passage. When the inlet temperature increases by 20 K, the heat efficiency of the cascade increases by about 1%.

Numerical study on the complicated flow filed of steam turbine condenser throat

Numerical Study on the Outlet Flow Field of the 300MW Steam Turbine’s Condenser Throat with Flow Guide Devices

Three-Dimensional Numerical Simulation of the Flow Field in Condenser Throat with Flow Guide Dev

Numerical Study of a Power Plant Condenser Tube Arrangement

Performance of non-equilibrium condensation flow in wet steam zone of steam turbine based on modified model

Numerical Calculation on Flow Field of Diaphragm Seals and Steam-exciting in 600MW Steam Turbine

Numerical Investigation of the Cooling Flow Downstream of a Turbine Guide Vane Trailing Edge Slot

Research on fluid flow and heat transfer characteristics in a three-dimensional condenser

Influence of aerodynamic characteristics optimization of exhaust passage on heat transfer of condenser in steam turbine

A Review on the Research of Flow and Heat Transfer in Steam Condensing

Effect of Cooling Water Flow Path on the Flow and Heat Transfer in a 660 MW Power Plant Condenser

The effect of the inlet steam superheat degree on the non-equilibrium condensation in steam turbine cascade

Thermal analysis and performance investigations of shell and tube heat exchanger using numerical simulations

Numerical methods development for non-equilibrium wet steam condensing flow

Multi-Factor Optimization Study on Aerodynamic Performance of Low-Pressure Exhaust Passage in Steam Turbines

Homogeneous/heterogeneous Condensing Flow Modeling in Turbine Cascades

Non-equilibrium Condensing Flow Modeling in Nozzle and Turbine Cascade

Numerical Investigation of Air-Steam Condensation in a Vertically Enhanced Tube with Concave and Convex Surfaces

A numerical study on convective condensation of flue gas in tubular heat exchangers

Numerical Study of the Secondary Flow in Steam Turbine Static Cascade under Varying Conditions

Numerical Investigation of Influence for Cooling Hole Shape on Turbine Flowfield