Abstract:AE44-2 magnesium (Mg) alloys were fabricated by gravity casting (GC), high pressure die casting (HPDC), and high vacuum assisted high pressure die casting (HVHPDC). The effect of these three different casting techniques on the microstructure evolution, texture, and mechanical properties of the AE44-2 alloy was investigated. The results showed that the different cooling rates in these three different casting techniques led to the different distribution and morphology of the precipitated phases, and rapid cooling contributed to a dense network distribution of the phases as well as grain refinement. In addition, the faster cooling rate resulted in a decrease of the dislocation accumulation. The addition of vacuum assistance in the HPDC process increased texture strength. The average grain size of the HPDC alloy was reduced by 90.4% compared to the GC alloy and the yield strength increased by 85.7 MPa due to rapid cooling. The elongation of the HVHPDC alloy increased by 2.3% compared to the HPDC alloy due to vacuum assistance. Moreover, the mechanical properties improved for the alloys in the order of GC < HPDC < HVHPDC because of gran refinement caused by the faster cooling rate. Based on the analysis of the strengthening mechanisms, the rapid cooling process of the HPDC alloy led to better strengthening compared to the GC alloy. In addition, grain refinement contributed to 82.1% of the strengthening mechanism.

Microstructure and Properties of Ceramic Mold Low Pressure Casting Magnesium Alloy

Production of magnesium alloy complex thin-walled parts by investment casting

Microstructures and Mechanical Properties Ofaz91d Magnesium Alloy Processed by Low Pressure Die Casting

Experimental study of squeeze casting of ZK60 magnesium alloy

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

The Effect of Slow Shot Speed and Casting Pressure on the 3D Microstructure of High Pressure Die Casting AE44 Magnesium Alloy

Microstructure and Mechanical Properties of As-Cast and Extruded Mg–8Li–3Al–2Zn–0.5Nd Alloy

Microstructures and Mechanical Properties of As-Cast and As-Extruded Mg-4.50zn-1.13ca (wt%) Alloys

The effect of different high pressure die casting parameters on 3D microstructure and mechanical properties of AE44 magnesium alloy

Casting Technology of High Strength and Heat-resistant Magnesium Alloy

Investigation of Properties in Magnesium Alloy Thin Plates after Die Casting Processes

Microstructure evolution and mechanical properties of an ultra-high strength casting Mg–15.6Gd–1.8Ag–0.4Zr alloy

Microstructure and Mechanical Properties of Squeezing Casting Mg-Nd-Gd-Zn-Zr Alloy

Microstructure of Zn-Al4 alloy microcastings by micro precision casting based on metal mold

Effect of Different Casting Techniques on the Microstructure and Mechanical Properties of AE44-2 Magnesium Alloy

Microstructure and Mechanical Properties of Mg–4.0Zn–0.5Ca Alloy

Microstructure and mechanical properties of low pressure die cast AM50 magnesium alloy

Microstructure and mechanical properties of Mg–4Al–4Nd–0.5Zn–0.3Mn alloy

Effects of Mould Structure and Pouring Temperature on Mechanical Properties of Mg-6Al-2.4Y Alloy

Analysis of Fractures and Microstructures on Different Injection Speeds in High-Pressure Die-Casting Magnesium Alloy

Effect of Mg addition on microstructure and mechanical properties of Al-Si-Cu-Fe alloy with squeeze casting