Abstract:Yttria-stabilized zirconia (YSZ) is a fine ceramics material that has been applied to dental implants and mechanical components. As YSZ is a hard, brittle, and chemically stable material, that undergoes phase transformation during mechanical loading, it is difficult to fabricate nanostructures using mechanical processing methods. In this study, a surface structuring method using a femtosecond pulsed laser was proposed, which is effective in suppressing the mechanical loading-induced phase transformation. As the material properties of YSZ vary with the concentration of yttria dopant , polycrystalline zirconia samples with different yttria concentrations (2, 3, 5, and 8 mol%) were used to investigate the effect of yttria concentrations on laser processing characteristics for nanostructuring. At all concentrations, nanopore generation in the surface grain was achieved by laser irradiation near the ablation threshold. In addition, there was no significant change in the crystal structure before and after laser irradiation, and no damage to the bulk occurred. At 2 mol%, intergranular cracks were generated around the pores. By increasing the dopant level to 5 mol%, the lens effect of the crystal grains became stronger due to enhanced grain growth, and the diameter and number of pores increased. In addition, pores formed preferentially on smaller grains at 5 mol%. However, for YSZ with 8 mol%, the pore formation phenomenon was different from that in the lower dopant level, as the area near the grain boundary was preferentially ablated, and microcracks formation and exfoliation of the surface also occurred. These results contribute to a deeper understanding of the laser ablation characteristics of zirconia with different dopant levels and to the development of surface structuring methods for fine ceramics materials.

PREPARATION AND CHARACTERIZATION OF THREE-DIMENSIONALLY ORDERED MACROPOROUS YTTRIA STABILIZED ZIRCONIA

Formation and Rate Processes of Y2o3 Stabilized Zro2 Thin Films from Zr(Dpm)(4) and Y(Dpm)(3) by Cold-Wall Aerosol-Assisted Mocvd

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Formation and Rate Processes of Y[sub 2]o[sub 3] Stabilized ZrO[sub 2] Thin Films from Zr(DPM)[sub 4] and Y(DPM)[sub 3] by Cold-Wall Aerosol-Assisted MOCVD

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Preparation and characterization of yttria stabilized zirconia nanoarrays

Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Preparation of Yttria Stabilized Zirconia Ultrafiltration Membranes with Inorganic Precursors

Preparation of epitaxial yttria-stabilized zirconia with non-quilibrium t' phase and ferroelastic domain by pulsed laser deposition

Preparations and Characterizations of New Mesoporous ZrO2 and Y2O3-stabilized ZrO2 Spherical Powders

Preparation of unidirectional porous yttria stabilized zirconia ceramics by an alginate self assemble method

Study of Factors Influencing the Microstructure and Phase Content of Ultrafine Y-Tzp

From zirconia to yttria: Sampling the YSZ phase diagram using sputter-deposited thin films

Preparation and properties of yttria-stabilized tetragonal phase zirconia nano-ceramics by high gravity

Preparation of Porous YSZ Monoliths via Sol-gel Process Accompanied by Phase Separation

Raman and X-ray photoelectron spectroscopic characterizations of thermal stability of 3 mol% yttria stabilized zirconia ceramics

Ethanol-induced formation of precursor for 8mol% Yttria-stabilized zirconia: Towards the production of well-dispersed, easily sintering, and high-conductivity nano-powders

Fabrication and Properties of Porous Yttria-Stabilized Zirconia Ceramics

Preparation and Characterization of Highly Permeable Porous Yttria-Stabilized Zirconia Hollow Fiber Membrane

Effect of dopant concentration on femtosecond pulsed laser irradiation of yttria-stabilized zirconia for generating nanopores