Abstract:BACKGROUND Zirconia is one of the most widely used ceramic materials for transplanting and treating caries. This study aimed to synthesize zirconium oxide (ZrO₂) nanotubes and evaluated their characteristics. MATERIAL AND METHODS Zr film was prepared using an ion plating method. Nanoarray film was constructed with anodizing. Photocatalytic properties of nnanotubes were assessed by evaluating decolorization of methyl orange. Elemental analysis and structural morphology for coatings were evaluated using x-ray analysis and scanning electron microscopy (SEM). Dimensions for layers were measured with SEM imaging. X-ray diffraction (XRD) was measured using Empyrean x-ray diffractometry. RESULTS There were irregular cavities on the surface of ZrO₂ nanotubes undergoing anodizing of 30V. Anodizing voltage of 45 V (with regular nano-pore arrays and smooth nanotube walls) and anodic oxidation duration of 60 min (ZrO₂ nanotubes clearly formed atop ZrO₂-coated substrate surface) were the optimal condition for ZrO₂ nanotube formation. TEM illustrated tube length of ZrO₂ nanotubes was approximately 2.01 μm. Nanotube diameter was 51.06 nm, and wall thickness was 13 to 14 nm. Annealed nanotubes showed an obvious crystal diffraction pattern. TEM diffraction ring showed nanotube array without obvious transistor structure before annealing, but with good crystallinity post-annealing. Increased annealing temperatures result in enhanced intensity for the monoclinic phase (400-800°C). After annealing at 600°C, the decolorization effect of ZrO₂ nanotubes on methyl orange was better than that post-annealing at 400 and 800°C. ZrO₂ nanotubes demonstrated higher microshear bond strength. CONCLUSIONS Zirconium nanotubes were successfully synthesized and demonstrated good structural characteristics, which can be applied to transplanting and treating caries.

Ti-Zr-O Nanotube Arrays with Controlled Morphology, Crystal Structure and Optical Properties

Anodic Fabrication of Ti-Nb-Zr-O Nanotube Arrays

Nanotubular ZrTiO4 Prepared on Sputter Deposited Zr−Ti Films by Anodization

Nanotubular ZrTiO 4 Prepared on Sputter Deposited Zr−Ti Films by Anodization

Microstructures and Optical Properties of TiO2/ZrO2 Nanotube/nanoporous Heterofilm Prepared by Anodizing of Ti/Zr/Ti Multilayer Films

Morphology of nanotube arrays grown on Ti-35Nb-2Ta-3Zr alloys with different deformations

Zinc-Doped TiO<sub>2</sub> Nanotube Arrays

Morphology of TiO_2 Nanotube Arrays Prepared by Anodic Oxidation

Three dimensional ZnO nanotube arrays and their optical tuning through formation of type-II heterostructures

Synthesis and Properties of Aligned ZnO Microtube Arrays

Fabrication, Characterization and Optical Properties of TiO 2 Nanotube Arrays on Boron-Doped Diamond Film Through Liquid Phase Deposition

Fabrication of Zirconia Nanotube Arrays by Anodization

Surface modification of low-modulus Ti35NbXZr alloys with nanotube arrays

Fabrication and Characterization of Self-Organized Mixed Oxide Nanotube Arrays by Electrochemical Anodization of Ti–6Al–4V Alloy

Preparation of a Novel Transplant Material, Zirconium Oxide (ZrO₂) Nanotubes, and Characterizations Research

Structure And Bioactivity Of Zirconia Nanotube Arrays Fabricated By Anodization

Fabrication and Mechanical Properties of Anodized Zirconium Dioxide Nanotubular Arrays

Controlled Fabrication of Highly Oriented ZnO Microrod/microtube Arrays on a Zinc Substrate and Their Photoluminescence Properties.

Pb(Zr0.52Ti0.48)O3 Nanotubes Synthesis and Infrared Absorption Properties

Fabrication and photoluminiscent properties of titanium oxide nanotube arrays

Preparation of High-ordered TiO2 Nanotube Arrays