Abstract:The boron-doped TiO2 nanotube arrays were fabricated by potentiostatic anodization of titanium in an aqueous electrolyte containing fluoride ion and sodium fluoroborate (NaBF4). The highly ordered nanotube arrays with an inner pore diameter of approximately 80nm and a length of 1.4μm are obtained. X-ray photoelectron spectroscopy (XPS) data indicate that the boron atoms are successfully incorporated into the TiO2 matrix, forming Ti–B–O bond in the sample with small amount of boron (1.5at.%), and the chemical environment surrounding boron is more similar to that in B2O3 in the samples with larger amounts of boron (3.1 and 3.8at.%). The B-doped TiO2 nanotube arrays with a mixture of anatase phase and very little rutile phase upon thermal annealing at 500°C for 2h were identified by X-ray diffraction (XRD). Red shifts and enhanced absorption intensities in both UV and visible light regions are observed in the spectra of UV–vis absorption of B-doped samples. The B-doped nanotube arrays show improved photochemical capability under both simulated sunlight and UV irradiation. By comparison, the sample with 3.1at.% of boron exhibits the best photoelectrochemical properties, and its photocurrent densities under simulated sunlight and UV irradiation are approximately 1.17 and 1.27 times of those of TiO2 nanotube arrays, respectively. The visible photoelectrocatalytic (PEC) activities of the prepared electrodes were evaluated using atrazine as a test substance under simulated sunlight irradiation. The kinetic constant of PEC degradation of atrazine using B-doped electrode with 3.1at.% of boron is 53% higher than that using non-doped one. A synergetic effect of the photocatalytic (PC) and electrochemical (EC) processes is observed.

Fabrication, Characterization and Optical Properties of TiO 2 Nanotube Arrays on Boron-Doped Diamond Film Through Liquid Phase Deposition

Fabrication and Characteristics of TiO2 Nanotubes on Hemispherical Diamond Films Using ZnO Nanorods As Template

Fabrication of Well-Aligned Tio2 Nanotube Arrays with Outstanding Light-Induced Hydrophilicity Performance

Enhanced Photoelectric Effect of TiO_2 Nanotube Arrays Modified by Zn Implantation

Hydrothermal synthesis, characterization and properties of TiO2 nanorods on boron-doped diamond film

Preparation and luminescence properties of Tb3+ doped SiO 2 film on TiO2 nanotube arrays

Ti-Zr-O Nanotube Arrays with Controlled Morphology, Crystal Structure and Optical Properties

Fabrication and Charaterization of Nitrogen-Doped TiO_2 Nanotube Array and Its Visible Light Activity

Formation of Diamond Films with Different Grain Sizes on TiO2 Nanotubes and Its Field Emission Properties

Fabrication and photoluminiscent properties of titanium oxide nanotube arrays

Preparation and Characterization of N-Doped TiO_2 Nanotube

Synthesis and characterization of TiO 2 nanotube film on fluorine-doped tin oxide glass

Optical and electrical characterization of TiO nanotube arrays on titanium substrate

Zinc-Doped TiO<sub>2</sub> Nanotube Arrays

Boron-doped TiO2 Nanotube Array: in Situ Electrochemical Preparation and Study on Its Photocatalytic Activity

A Facile Route to N-Type Tio2-Nanotube/P-Type Boron-Doped-Diamond Heterojunction for Highly Efficient Photocatalysts

Characteristics of TiO<sub>2</sub> Nanotube Arrays on Titanium Prepared by Anodization

Optical and electrical characterization of TiO2 nanotube arrays on titanium substrate

Fabrication, Characterisation and Photocatalytic Activity of Tio2 Nanorods on Boron Doped Diamond Film Through Hydrothermal Method

Preparation and Characterization of Cu-doped TiO2 Nanotube Array Films

Characterization of boron-doped TiO2 nanotube arrays prepared by electrochemical method and its visible light activity