Abstract:In this article, a numerical study is conducted to predict the air-side heat transfer and pressure drop characteristics of slit fin-and-tube heat transfer surfaces. A three-dimensional steady laminar model is applied, and the heat conduction in the fins is also considered. Five types of slit fins, named slit 1, slit 2, slit 3, slit 4, and slit 5, are investigated, which have the same global geometry dimensions and the same numbers of strips on the fin surfaces. The only difference among the five slit fins lies in the strip arrangement. Slit 1 has all the strips located in the front part of the fin surface, then, following the order from slit 1 to slit 5, the strip number in the front part decreases and, correspondingly, the strip number in the rear part increases, so that all the strips of slit 5 are located in the rear part. Furthermore, slit 1 and slit 5, slit 2 and slit 4, have a symmetrical strip arrangement along the flow direction. The numerical results show that, following the order from slit 1 and slit 5, the heat transfer rate increases at first, reaching a maximum value at slit 3, which has the strip arrangement of “front coarse and rear dense”; after that, it begins to decrease, as does the fin efficiency. Although they have the symmetrical strip arrangement along the flow direction, slit 5 has 7% more Nusselt number than slit 1, and slit 4 also has 7% more Nusselt number than slit 2, which shows that strip arrangement in the rear part is more effective than that in the front part. Then the difference of heat transfer performance among five slit fins is analyzed from the viewpoint of thermal resistance, which shows that when the thermal resistances in the front and rear parts are nearly identical, the optimum enhanced heat transfer fin can be obtained. This quantitative rule, in conjunction with the previously published qualitative principle of “front sparse and rear dense,” can give both quantitative and qualitative guides to the design of efficient slotted fin surfaces. Finally, the influence of fin material on the performance of enhanced-heat-transfer fins is discussed.

Visualization Experiments on Air Side Heat Transfer and Fluid Flow Characteristics of Arc-Type and X-type Slotted Fin Surfaces

Configuration Optimization Design for Slotted Fin Surfaces in Pressurized Air Cooler

Experiment and Numerical Simulation for Characteristics of Two Slotted Fins

SPACE FLUCTUATION PARAMETERS AND ITS APPLICATION IN CONFIGURATION OPTIMIZATION DESIGN FOR SLOTTED FIN SURFACES

PIV and thermal-vision experimental and numerical investigation on the airside performance of slotted fin surfaces

Experimental and Numerical Study on Heat Transfer and Fluid Flow Characteristics of Slotted Fin and Tube Heat Transfer Surfaces

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Three-dimensional Numerical Simulation of Flow and Heat Transfer on Slit Fins

Numerical Design of Efficient Slit Fin Surfaces with Strips in Different Directions

NUMERICAL DESIGN OF EFFICIENT SLOTTED FIN SURFACE BASED ON THE FIELD SYNERGY PRINCIPLE

Three Dimensional Numerical Simulation and Analysis of the Airside Performance of Slotted Fin Surfaces with Radial Strips

EXPERIMENTAL AND NUMERICAL STUDY ON HEAT TRANSFER CHARACTERISTICS OF THREE-ROW SLOTTED FINS WITH SMALL DIAMETERS

Numerical simulation of slit fin cell's flow and heat transfer

The Influence of Strip Location on the Pressure Drop and Heat Transfer Performance of a Slotted Fin

Numerical Simulation Of Heat Transfer Performance Of Slotted Fin Surface

Three-Dimensional Numerical Simulation on Laminar Heat Transfer and Fluid Flow Characteristics of Strip Fin Surface With X-Arrangement of Strips

Optimum Design of Two-Row Slotted Fin Surface with X-Shape Strip Arrangement Positioned by “Front Coarse and Rear Dense” Principle, Part II: Results and Discussion

Flow and Heat Transfer in Compact Offset Strip Fin Surfaces

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns

Experimental Investigation on Heat Transfer and Flow Friction Characteristics in Three Types of Plate Fin-and-Tube Heat Exchangers

Numerical simulation and field synergy analysis of heat transfer performance of radial slit fin surface