Optimum Design of Two-Row Slotted Fin Surface with X-Shape Strip Arrangement Positioned by “Front Coarse and Rear Dense” Principle, Part II: Results and Discussion

W. W. Jin,Y. L. He,Z. G. Qu,C. C. Zhang,W. Q. Tao

DOI: https://doi.org/10.1080/10407790600605871

2006-01-01

Abstract:In Part I of this article, design considerations for 15 slotted fin surfaces are introduced, and the physical/mathematical model and numerical methods are described. The strips in all slotted fin surface are designed according to two general guidelines: "front coarse and rear dense" and "X-shape arrangement." In this article, the specific flow and heat transfer characteristics of the 15 slotted fin surfaces and their comparisons with the plain plate surface are presented. The major findings are as follows. For all 15 slotted fin surfaces, their j/f versus Re curves cross with the curve of the plain plate fin surface at some turning Reynolds number, beyond which the j/f ratio of slotted fin surfaces is higher than that of plain plate fin surfaces, and vice versa. The variation character of heat transfer rate versus Reynolds number under identical pumping power condition has the same feature, with its turning Reynolds number being appreciably lower than the former one. However, at the identical flow rate the heat transfer rates of all the slotted fin surfaces are higher than that of the plain plate fin, and the larger the velocity, the more significant the enhancement. Among the four techniques adopted-changing the number of strips, shortening the strip length, changing the location of the strips, and splitting one strip into two-the effect of strip location is the most and that of splitting one into two is the least. The field synergy principle analysis shows that the higher heat transfer rate of the slotted fin surfaces comes from their better synergy between velocity and temperature gradient. Two patterns of slotted fin are recommended for the two-row plate fin-and-tube surface.