Abstract:Three-phase packed distillation has been so far relatively poorly understood. Hence, a Substantial mass transfer model describing the (vapor-liquid-liquid) three-phase flow in packed column is proposed to explore the essence of three-phase distillation. The model enables, for the first time, rigorous computation of all the interphase transfer parameters oil the basis of a thorough consideration of the unique How behaviors (Such as film breakup, rivulet-flow, Surface variation, etc.) Caused by the second liquid. The derived theoretical mass transfer model has been incorporated into the three-phase nonequilibrium Simulation. Moreover, comprehensive experimental investigations have been carried Out using two laboratory-scale columns, and four different packings (Montz-Pak B1-350, Rombopak 9M, Raschig Super-Ring 0.3, and Sulzer Optiflow C.36) were considered. The derived experimental database, covering a wide range of load conditions, is used for flow pattern identification and model validation. For the Studied n-butanol/water/n-propanol system, it is revealed that the flow pattern of file second liquid (aqueous phase) could play a critical role in the system performance. When the second liquid flows below the first liquid film, it will enlarge the interfacial area and enhance the vapor-liquid mass transfer; when the second liquid flows above the first liquid film, it will reduce the interfacial area and degrade the mass transfer. This fundamental flow behavior may essentially result in the discrepancy existing in the highly variable separation efficiencies in three-phase packed columns.

Simulation on Synthesis of MTBE in Suspension Catalytic Distillation Column

A Study on Increasing Separation Efficiency of an Industrial, Compound Distillation Column

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Influence of Operating Conditions on the Hybrid Separation Process Used for C4 Etherified Products

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Nonequilibrium model and parameter estimation on three-phase distillation in a packed column

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Study on Hydrolysis of Methyl Acetate in A Catalytic Distillation Column

Process simulation based on experimental investigations for 3-methylthiophene alkylation with isobutylene in a reactive distillation column

Process Simulation of Dimethyl Ether Synthesis Via Methanol Vapor Phase Dehydration

Simulation of Catalytic Distillation Process for Cumene Synthesis

Compartmental modeling and solving of large-scale distillation columns under variable operating conditions

Simulation for the Reactive Distillation Process to Synthesize Ethyl tert-Butyl Ether.

Modeling of Bubble Column Slurry Reactor for Dimethyl Ether Synthesis from Syngas

Reactive Distillation for Tert-Butyl Alcohol Dehydration with Dynamic Matrix Control

Simulation and Optimization of Energy Efficiency for Thermally Coupled Distillation Process in Benzene-Toluene-xylene System

Study on direct alcohol/ether fuel synthesis process in bubble column slurry reactor

Non-equilibrium Stage Model of Catalytic Distillation for Cumene Synthesis Using Low Concentration Propylene and Benzene

STUDY ON MOLECULAR SIMULATION AND PHASE EQUILIBRIUM FOR REMOVING DMDS IN MTBE BY EXTRACTIVE DISTILLATION

Design, optimization, and control of reactive distillation column for the synthesis of tert-amyl ethyl ether