Abstract:Three-phase packed distillation has been so far relatively poorly understood. Hence, a Substantial mass transfer model describing the (vapor-liquid-liquid) three-phase flow in packed column is proposed to explore the essence of three-phase distillation. The model enables, for the first time, rigorous computation of all the interphase transfer parameters oil the basis of a thorough consideration of the unique How behaviors (Such as film breakup, rivulet-flow, Surface variation, etc.) Caused by the second liquid. The derived theoretical mass transfer model has been incorporated into the three-phase nonequilibrium Simulation. Moreover, comprehensive experimental investigations have been carried Out using two laboratory-scale columns, and four different packings (Montz-Pak B1-350, Rombopak 9M, Raschig Super-Ring 0.3, and Sulzer Optiflow C.36) were considered. The derived experimental database, covering a wide range of load conditions, is used for flow pattern identification and model validation. For the Studied n-butanol/water/n-propanol system, it is revealed that the flow pattern of file second liquid (aqueous phase) could play a critical role in the system performance. When the second liquid flows below the first liquid film, it will enlarge the interfacial area and enhance the vapor-liquid mass transfer; when the second liquid flows above the first liquid film, it will reduce the interfacial area and degrade the mass transfer. This fundamental flow behavior may essentially result in the discrepancy existing in the highly variable separation efficiencies in three-phase packed columns.

Non-equilibrium Stage Model of Catalytic Distillation for Cumene Synthesis Using Low Concentration Propylene and Benzene

Simulation of Catalytic Distillation Process for Cumene Synthesis

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Nonequilibrium model and parameter estimation on three-phase distillation in a packed column

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Hooke-Jeeves Method for the Process of Producing Isopropylbenzene by Catalytic Distillation

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Stability and dynamic behaviors of gas-phase ethylene polymerization process under condensed mode operation

NON-EQUILIBRIUM MODEL BASED LARGE-SCALE PARAMETER ESTIMATION FOR THREE-PHASE DISTILLATION IN PACKED COLUMNS

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Study on Hydrolysis of Methyl Acetate in A Catalytic Distillation Column

Gas–liquid and gas–liquid–solid reactors for the alkylation of benzene with propylene

Study on Catalyst Packing Structure in Catalytic Distillation Process for Cumene Synthesis

Regulation of catalytic reaction via vapor-phase condensation. 2. Operational realization in a two-stage reactor

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

A new internal structure used in catalytic distillation reactor - II. Synthesis of cumene

General model to simulate the catalytic distillation process of methyl acetate hydrolysis | Ein allgemeingueltiges Modell zur Simulation der katalytischen Destillation am Beispiel der Hydrolyse von Methylacetat

Modeling and Simulation of Commercial Catalytic Reformers

Modeling and Control Design for Distillation Columns Based on the Equilibrium Theory

Dynamic Simulation of Butene Isomerization by Reactive Distillation

Simulating a Multiphase Reactor with Continuous Phase Transition