Abstract:This study presents a hybrid method of three-dimensional computational fluid dynamics (CFD) commercial software and inverse method along with experimental data and various flow models to study the natural convection heat transfer and fluid flow characteristics of vertical annular elliptical finned tube heat exchangers for various fin spacings. The inverse method of the finite difference method along with the experimental temperature data is first applied to estimate the heat transfer coefficient on the fins. After that, CFD along with various flow models and estimated heat transfer coefficients are used to determine air temperature and air velocity profiles, fin surface temperature and heat transfer coefficient on the fins. More accurate numerical results, appropriate flow model and number of grid points, number of iterations and relative convergence criteria can be obtained when the resulting heat transfer coefficient and fin temperature are as close as possible to the inverse results and experimental temperature measurements, respectively. The results show that the zero-equation turbulence model is more suitable for this study than other flow models. The choice of relative convergence criteria, number of iterations and grid points are important for obtaining more accurate results. The commercial software version, the relative convergence criteria for momentum and energy equations, the number of iterations and the N-t value vary with the fin spacing. The effect of the round-off error on the numerical results obtained needs to be considered. The heat transfer coefficient increases with increasing fin spacing and approaches a constant. The best fin spacing is about 18 mm. The fin efficiency of the annular elliptical fins is higher than that of the annular circular fins. The proposed correlations between Nusselt number and Rayleigh number is in good agreement with the numerical and inverse results obtained. (C) 2018 Elsevier Ltd. All rights reserved.

Numerical Simulation of Coupling of Heat Transfer with Cross Flow in Fixed Bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Numerical Simulation of Cross Flow in Fixed Bed Reactor

Numerical simulation for character of fluid flow through packed bed

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Eulerian-Lagrangian Simulation of the Heat Transfer Behavior of Particles with Different Diameters in Fluidized Bed with Immersed Tube

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical simulation of radiation heat transfer characteristics in a cylindrical fluidized bed

Numerical simulation on heat transfer performance in fin-plate adsorption bed

Mathematical Model and Numerical Solution of the Heat Transfer Process in the Solid Adsorption System

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Heat transfer in circulating fluidized bed and its modeling

Simulation of Flow and Heat Transfer in Micro Couette Flow

Numerical Investigation of the Effect of the Location of an Immersed Tube in a Fluidized Bed on Heat Transfer of Surface-to-bed

Heat transfer of tubes in gas-solid cross flow

Computational Fluid Dynamics Simulations of Interphase Heat Transfer in a Bubbling Fluidized Bed

Numerical Simulation of Natural Convection Heat Transfer for Annular Elliptical Finned Tube Heat Exchanger with Experimental Data

Numeric Simulation Of Convective Heat Transfer Across A Heated Cylinder By Lattice-Boltzmann Method

Numerical analysis of heat transfer characteristics of helium flow cross helically coiled tube bundle

Novel experimental–numerical study on inverse heat transfer by free convection and conduction for diamond-arranged tubes in a hot box