Abstract:The eutectic solidification strategy has been widely implemented in Al–Si, Al–Ni, and Al–Ce alloys to suppress cracking during laser powder bed fusion (LPBF) processes. More significantly, the resultant cellular structures that comprise cells and eutectic networks at the cell boundaries, have exhibited great potential for improving strength and ductility. However, the formation mechanism of cellular structures during rapid solidification (RS) has not been thoroughly understood, impeding the fine-tuning of cells and eutectic networks in additive manufacturing (AM). In this study, based on the Al–Ni liquidus/solidus, the eutectic coupled zone (ECZ) of the Al–Ni system, the Mullins–Sekerka stability criterion and the limit of absolute stability, the solidification microstructure selection maps of the Al–Ni system for constrained (directional) growth are modeled. During the map construction process, holding the idea that the divorced eutectic reaction occurs when the width of the liquid entrapped at the α-Al cell boundaries is comparable to the Al–Al 3 Ni eutectic spacing, a model criterion evaluating the formation of Al–Ni divorced eutectic is proposed by integrating eutectic and dendritic growth models. Then the formation regions of the cellular structures containing Al 3 Ni divorced eutectic networks are marked in the maps. Finally, the formation of cellular structures in the Al–Ni system under LPBF conditions is elucidated with the help of the microstructure selection maps in composition–interface temperature ( C 0 – T i ) space and temperature gradient–solidification velocity ( G – V ) space. The outcomes of this study may provide a basic idea for tailoring the cellular structures of eutectic Al alloys fabricated by the LPBF technique.

Producing Well Aligned in Situ Composites in Peritectic Systems by Directional Solidification

Well-Aligned In Situ Composites In Directionally Solidified Fe-Ni Peritectic System

Spacing selection of cellular peritectic coupled growth during directional solidification of Fe–Ni peritectic alloys

Two-phase Separated Growth and Peritectic Reaction During Directional Solidification of Cu–Ge Peritectic Alloys

Phase and Microstructure Selection in Directionally Solidified Peritectic Alloys with Convection

Towards Homogeneous Distribution of Coarse Grain in a Tri-Modal Al-based Composites Utilizing Localized Grain Growth

Directional Solidification and Microstructure Selection for Ti-Al Peritectic Alloy

Directional Solidification of Cu–20Sn Alloy at Low Speed: from Peritectic Coupled Growth to Banding

Peritectic Reaction and Its Influences on the Microstructures Evolution During Directional Solidification of Fe–Ni Alloys

Formation Mechanism of Band Structure and Phase Selection During Directional Solidification of Peritectic Alloys - Ii. Phase Selection

Morphological Characteristics of Triple Junction Region and Process of the Peritectic Reaction During Directional Solidification of Cu–Ge Alloys

Isothermal Peritectic Coupled Growth in Directionally Solidified Cu-20 Wt Pct Sn Alloy

Microstructure Evolution of Ti-Al Peritectic System During the Initiated Stage of Directional Solidification

Phase-Field Research of Microstructure Evolution for Directionally Solidified Peritectic Transition - I. Extension of Trijunction

Multiphase Flow in Directional Solidification of Metal Matrix Particulate Composites

Investigation of Microstructure Evolution and Phase Selection of Peritectic Cuce Alloy During High-Temperature Gradient Directional Solidification

Understanding cellular structure formation in rapidly solidified Al–Ni alloys by constructing solidification microstructure selection maps

Morphological Stability of Coupled Growth During Directional Solidification of Eutectic and Peritectic Alloys

Continued Growth Controlling of the Non-Preferred Primary Phase for the Parallel Lamellar Structure in Directionally Solidified Ti–50Al–4Nb Alloy

Convection Effects and Banding Structure Formation Mechanism During Directional Solidification of Peritectic Alloys Ii. Theoretical Analysis

To Eliminate the Composition Transient Zone in Directional Solidification of TiAl Alloys