Abstract:A two-dimensional model for the simulation of solidification microstructure in multi-component alloy systems has been developed. The model is based on a cellular automaton (CA) technique for the calculation of the evolution of solid/liquid (S/L) interface. The dynamics of the interface is controlled by temperature, solute diffusion and Gibbs-Thomson effects. The diffusion equation for the temperature with release of latent heat on the S/L interface is valid in the entire domain, and the solute diffusion equation is also used in the entire domain through potential functions. Two methods are proposed to calculate the increment of the solid fraction. The first method is based on the level rule method similar to the one proposed by Jacot et al., but without the assumption of uniform temperature on the scale of the calculation domain. The second one is based on the calculation of the S/L interface velocity, which generalizes the results of Nastac and Beltran-Sanchez et al. for two-component alloy systems. If the concentration of one of the solutes tends to zero, both proposed methods reduce to the methods in Jacot et al. and Beltran-Sanchez et al. for two component alloy systems. Mesh independency is achieved by both methods and the dendritic morphologies obtained are the same if the mesh is fine enough. However, the morphologies of equiaxed dendrites calculated by using the interface velocity tends to the stable form more easily than those calculated using the level rule method as the mesh size is refined. For two-component alloy systems, the predictions of LGK theory for the steady-state tip velocity are compared with simulated values as a function of melt undercooling, which shows good agreement at very large range of undercooling. The simulated primary arm spacing in directional solidification is compared with experimental results for Fe-Si-Mg alloys and good agreement is also observed. It is noted that both methods for computing the solid fraction can be used for any multi-component alloy systems provided that the thermodynamic data are given

Modeling of Dendritic Growth and Particle Pushing/engulfment in the Solidification of Aluminum Matrix Composites with the CA-LBM-IMB Method

A lattice Boltzmann model with sharp interface tracking for the motion and growth of dendrites in non-equilibrium solidification of alloys

Numerical Simulation on Dendritic Growth of Al-Cu Alloy under Convection Based on the Cellular Automaton Lattice Boltzmann Method

Simulation of the Dendrite Morphology and Microsegregation in Solidification of Al–Cu–Mg Aluminum Alloys

LBM-PF model-based simulation of effect of forced convection on dendrite growth in binary alloy

Modeling and Simulation of Dendrite Growth in Solidification of Al-Si-Mg Ternary Alloys

Three-dimensional Numerical Simulation of Meso-Scale Dendritic Growth in Alloys

Simulation of Dendritic Competitive Growth During Directional Solidification Using Modified Cellular Automaton Method

Microstructure Evolution During Directional Solidification of 2009al/sicp at Different Pulling Velocities: Modeling and Experiment

A Modified Cellular Automaton Method for the Modeling of the Dendritic Morphology of Binary Alloys

Exploration of the coupled lattice Boltzmann model based on a multiphase field model: a study of the solid-liquid-gas interaction mechanism in the solidification process

NUMERICAL SIMULATION OF DENDRITE MICROSTRUCTURE FOR Al-Si ALLOY WITH ADDITIVE PHASE

Numerical simulation of 3-D dendritic growth under forced convection using the modified cellular automaton method

Cellular Automaton Modeling for Dendritic Growth During Laser Beam Welding Solidification Process

A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Simulation of Dendritic Growth for Ternary Alloys Based on Modified Cellular Automaton Model

Three-Dimensional CA-LBM Model of Silicon Facet Formation during Directional Solidification

Numerical Simulation of Three-Dimensional Dendrite Movement Based on the CA–LBM Method

Experimental and simulation of primary dendrite spacing in directional solidification of Al-7Si-0.36Mg alloy

Directional Solidification of Metal Matrix Particulate Composite Materials

Modeling Dendrite Coarsening and Remelting during Directional Solidification of Al-06wt.%Cu Alloy