Abstract:The materials in the fusion system will be activated by the neutrons generated from D-T fusion reactions, causing the material with activity and decay heat at a variety level among the system. Predicting the amount of radwaste produced in the Chinese Fusion Engineering Testing Reactor (CFETR) and the time-evolution feature of the radwaste is of great importance to the minimization of waste and determine the management strategy. The purpose of this paper is to minimize the quality and quantity of the activated solid waste as low as reasonably achievable via source control, recycling and reuse, clearance, optimization of the management at the designing phase of CFETR. A detailed 3D model for CFETR is created to calculate the neutron spectra and fluxes of all non-void cells of the model. The inventory calculation for each cell with the given irradiation scenario and the cooling scheme was then carried out with FISPACT-II. The extensive calculation, data analysis, and post-processing are performed using a data processing code to calculate the component averaged activation responses and the waste classifications. The results suggest that the in-vessel materials exposed to high level neutron fluxes can hardly meet the clearance and low-level waste requirements, but they can be recycled with an advanced remote handling system shortly after shutdown or a conservative remote handling system after temporary storage within 100 years. The vacuum vessel, port plug, cryostat, and coils can be recycled with a conservative remote handling system with temporary storage. Especially, the port plug, cryostat, and central solenoid are clearable with temporary storage of 100 years. The influence of the operation time of in-vessel components on the radwaste severity and quantity is also evaluated. The severity of the radwaste increases when the operation time increases from 1000 to 3000 MWY, then decreasing with operation times longer than 3000 MWY. The detailed operation plan should be determined with comprehensive consideration of the important factors, including the influence on the radwaste severity. The allowed impurity level is also estimated, finding that the Uranium in the breeding zone and the SS316L used in divertor should be blamed for the intermediate-level waste production of blanket and divertor.

Activation Calculation and Analysis for Chinese ITER Solid Test Blanket Module

Three-dimensional Activation Analysis for ITER Solid Test Blanket Module

Activation Calculation and Environmental Safety Analysis for ITER Test Blanket Module

Activation and Afterheat Analysis for CH HCSB TBM

Activation calculation analysis for China helium cooled ceramic breeder test blanket system

Activation Calculation and Analysis for CFETR Blanket

Preliminary Neutronics and Activation Analysis of the Water Cooled Solid Breeder Blanket for CFETR

Activation Calculation and Radiation Analysis for China Fusion Engineering Test Reactor

Activation and Environmental Aspects of In-Vacuum Vessel Components of CFETR

Activation analysis for ITER shielding blanket

Activation Analysis and Waste Management for the Dual Functional Lithium-Lead Test Blanket Module for ITER

3-D Neutronics Calculation of the 2×6 HCSB TBM Model

Current Progress of Chinese HCCB TBM Program

The Neutron Calculation of the Chinese Helium Cooled Solid Breeder Test Blanket Module

Activation Analysis and Radwaste Assessment of CFETR

Electromagnetic Safety Analysis on Chinese ITER HCSB-TBM Design

Preliminary Safety Analysis For The Chinese Iter Dual Functional Lithium-Lead Test Blanket Module

Neutronic Calculation Analysis for CN HCCB TBM-Set

Analysis and design of neutronics for an ITER test blanket module

Impact Analysis of the Time Trend of Tbr and Irradiation Damage Assessment of Hcsb Blanket for Cfetr

Neutronics design and optimization for ITER helium cooled ceramic breeder test blanket module