Abstract:China Fusion Engineering Test Reactor (CFETR) is a superconducting tokamak proposed by national integration design group for magnetic confinement fusion reactor of China to bridge the R&D gaps between ITER and DEMO. Since the launch of CFETR conceptual design, a modular helium cooled lithium ceramic blanket concept had been under development by the blanket integration design team of the Institute of Plasma Physics of the Chinese Academy of Sciences, to complete CFETR in demonstrating its fusion energy production ability, tritium self-sufficiency and the remote maintenance strategy. To validate the feasibility, the neutronic analyses for CFETR with this modular helium cooled lithium ceramic blanket were performed. The 1-D neutronic study for CFETR was done in the first place to give a preliminary and quick demonstration of the overall neutronic performance. Meanwhile, the neutronic analyses for a single standard helium cooled lithium ceramic blanket module were done in several times to give more insight for the material and geometry parameters of intra-module structures. Therefore, the principles for neutronic design and the module level optimized parameters were produced, based on which the design of practical blanket modules planted in tokamak vacuum vessel was completed. In the end, the 3-D neutronic analysis for CFETR was done utilizing the MCNP code, in which the 11.25 degree sector model (consist of blanket modules, manifold, support plate, shield, divertor, vacuum vessel, thermal shield and TF coils) was generated with the McCad automated conversion tool from the reference CAD model for analysis, the bi-dimensional (radial and poloidal) neutron source map was plugged via general source definition card to stimulate the D-T fusion neutrons. The concerned neutronics parameters of CFETR, mainly including the tritium breeding ratio to characterize tritium self-sufficiency, the energy multiplication factor to characterize power generation, as well as, the inboard mid-plane radial profiles of neutron flux densities, helium production rate, displacement damage rate and the energy deposition to characterize the shielding performance, were produced. In principle, the neutronics performance of CFETR with modular helium cooled lithium ceramic blanket is promising. The tritium breeding capability meets the design target and, by referring to that for ITER and the EU DEMO fusion power plant, the inboard mid-plane shielding is effective to fulfill the radiation design requirement of the superconducting TF-coils, resulting in a compulsory warm-up time interval of ∼2 FPY for TF-coils. The nuclear heating loads to other CFETR components were generated. As an outcome of this work, the applicability of McCad on CFETR neutronic modeling is demonstrated.

Analysis and design of neutronics for an ITER test blanket module

Neutronics design and optimization for ITER helium cooled ceramic breeder test blanket module

Preliminary Design for a China ITER Test Blanket Module

The Neutron Calculation of the Chinese Helium Cooled Solid Breeder Test Blanket Module

Blanket design and neutronics analysis for compact tokamak test reactor

Calculations Of The Dual Functional Lithium Lead-Test Blanket Module For Iter With Three-Dimensional Deterministic Method

Current Progress of Chinese HCCB TBM Program

1-D neutronics optimization design for ITER CH HCSB TBM

Neutronic calculations of the China dual-functional lithium–lead test blanket module with the parallel discrete ordinates code Hydra

Neutronics calculation for ITER TBM with 3D deterministic method

Preliminary Neutronics Design and Analysis of the Bit Helium Cooling Ceramics Blanket for Cfetr

Evaluation and Optimization of Tritium Breeding, Shielding and Nuclear Heating Performances of the Helium Cooled Solid Breeder Blanket for CFETR

Conceptual Design and Neutronics/Thermal-Hydraulic Coupling Optimization Analyses of Two Typical Helium Cooled Solid Breeder Blanket Modules for CFETR Phase II

Three-dimensional Thermal-Hydraulics/neutronics Coupling Analysis on the Full-Scale Module of Helium-Cooled Tritium-Breeding Blanket

Preliminary Neutronics and Activation Analysis of the Water Cooled Solid Breeder Blanket for CFETR

Numerical research on the neutronic/thermal-hydraulic/mechanical coupling characteristics of the optimized helium cooled solid breeder blanket for CFETR

Design and analysis of the equatorial inboard WCCB blanket module for CFETR

Impact Analysis of Helium Cooled Solid Blanket Structures on the Tritium Breeding Performance in CFETR

Thermal hydraulic design and analysis of the dual-function lithium-lead test blanket module for ITER

Neutronic Analyses for CFETR with Modular Helium Cooled Lithium Ceramic Blanket

Numerical simulation of the temperature field in the ITER Chinese helium cooled solid breeder test blanket module