Abstract:The development of fusion energy is one of the important International energy strategies with the important milestone is ITER (International Thermonuclear Experimental Reactor) project, initiated by many countries, such as: America, Europe, and Japan who agreed to set up TOKAMAK type fusion reactor in France. In ideal fusion reactor the fuel is purely deuterium, but it need higher temperature of reactor. In ITER project the fuels are deuterium and tritium which need lower temperature of the reactor. In this study tritium for fusion reactor can be produced by using reaction of lithium with neutron in the blanket region. With the tritium breeding blanket which react between Li-6 in the blanket with neutron resulted from the plasma region. In this research the material used in each layer surrounding the plasma in the reactor is optimized. Moreover, achieving self-sufficiency condition in the reactor in order tritium has enough availability to be consumed for a long time. In order to optimize Tritium Breeding Ratio (TBR) value in the fusion reactor, there are several strategies considered here. The first requirement is making variation in Li-6 enrichment to be 60%, 70%, and 90%. But, the result of that condition can not reach TBR value better than with no enrichment. Because there is reduction of Li-7 percent when increasing Li-6 percent. The other way is converting neutron multiplier material with Pb. From this, we get TBR value better with the Be as neutron multiplier. Beside of TBR value, fusion reactor can analyze the distribution of neutron flux and dose rate of neutron to know the change of neutron concentration for each layer in reactor. From the simulation in this study, 97% neutron concentration can be absorbed by material in reactor, so it is good enough. In addition, it is required to analyze spectrum neutron energy in many layers in the fusion reactor such as in blanket, coolant, and divertor. Actually material in that layer can resist in high temperature and high pressure condition for more than ten years.

Optimization Arrangement of Neutron Multiplier and Tritium Breeder for the Chinese ITER Solid TBM

Neutronics Analyzation of Helium Cooled Solid Breeder Blanket in a Fusion Reactor

Current Progress of Chinese HCCB TBM Program

Neutronics Design Optimization on Cross Cooled Solid Blanket of Fusion Reactor

Study on Neutronics and Thermo-hydraulics for Mixed Pebble Bed Blanket of Fusion Reactor

Optimal Design for Helium Cooled Solid Breeder Blanket of CFETR

Numerical simulation of the temperature field in the ITER Chinese helium cooled solid breeder test blanket module

Tritium Transport Modeling and Analysis for HCCB Blanket of CFETR

Tritium Breeder Layer Evaluation of Fusion-Fission Hybrid System

Neutronics Comparison Analysis of the Water Cooled Ceramics Breeding Blanket for CFETR

An Approach to Increase the Fusion Tritium Breeding Ratio Using Temperature Field Balance Based on Water-Cooled Ceramic Blanket

Numerical Simulations of the Temperature Field in the Breeding Sub-Module of the ITER Chinese Helium Cooled Solid Breeder Test Blanket Module

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

Current Design And R&D Progress Of The Chinese Helium Cooled Ceramic Breeder Test Blanket System

Investigation on the Tritium Self-Sufficiency and Neutron Shielding Based on a Water-Cooled Blanket for CFETR at 1.5 GW

Neutronics Effects of Homogeneous Model on Solid Breeder Blanket of CFETR

Optimization of Tritium Breeding Ratio in a DT and DD Submersion Tokamak Fusion Reactor

Optimization of tritium breeding and shielding analysis to plasma in ITER fusion reactor

Design, synthesis and characterization of advanced tritium breeder: Li4Si1-xTixO4 ceramics

Tritium breeding ratio optimization in simple multi-layer blanket with genetic algorithm

Progress on Solid Breeder TBM at SWIP