Abstract:The water-cooled ceramic breeder（WCCB） blanket is one of the three candidates of China’s Fusion Engineering Test Reactor（CFETR）. The evaluation of the radioactivity and decay heat produced by neutrons for the in-vacuum vessel components is essential for the assessment of radioactive wastes and the safety of CFETR. The activation calculation of CFETR in-vacuum vessel components was carried out by using the Monte Carlo N-Particle Transport Code MCNP, IAEA Fusion Evaluated Nuclear Data Library FENDL2.1, and the nuclear inventory code FISPACT-2007 and corresponding EAF-2007 libraries. In these analyses, the three-dimensional（3-D） neutronics model was employed and the WCCB blanket, the divertor, and the shield were modeled in detail to provide the detailed spatial distribution of the neutron flux and energy spectra. Then the neutron flux, energy spectra and the materials specification were transferred to FISPACT for the activation calculation with an assumed irradiation scenario of CFETR. This paper presents the main results of the activation analysis to evaluate the radioactivity, the decay heat, the contact dose, and the waste classification of the radioactive materials. At the time of shutdown, the activity of the WCCB blanket is 1.88×10 19 Bq and the specific activity, the decay heat and the contact dose rate are 1.7×10 13 Bq/kg, 3.05 MW, and 2.0×10~3Sv/h respectively. After cooling for 100 years, 79%（4166.4 tons） radioactive wastes produced from the blanket, divertor,high temperature shield（HTS） and low temperature shield（LTS） need near surface disposal, while21%（1112.3 tons） need geological disposal. According to results of the contact dose rate, all the components of the blanket, divertor, HTS and LTS could potentially be recycled after shutdown by using advanced remote handling equipment. In addition, the selection of Eurofer97 or RAFM for the divertor is better than that of SS316 because SS316 makes the activity of the divertor-body keep at a relatively high level.

Activation calculation analysis for China helium cooled ceramic breeder test blanket system

Neutronic Calculation Analysis for CN HCCB TBM-Set

Activation Calculation and Analysis for Chinese ITER Solid Test Blanket Module

Three-dimensional Activation Analysis for ITER Solid Test Blanket Module

Activation Calculation and Environmental Safety Analysis for ITER Test Blanket Module

Preliminary In-box LOCA Analysis for China Helium Cooled Ceramic Breeder Test Blanket System

Preliminary Neutronics and Activation Analysis of the Water Cooled Solid Breeder Blanket for CFETR

Neutronics design and optimization for ITER helium cooled ceramic breeder test blanket module

Safety assessment of Chinese ITER TBM design with helium-cooled solid breeder concept

Activation and Afterheat Analysis for CH HCSB TBM

Activation and Environmental Aspects of In-Vacuum Vessel Components of CFETR

Activation Calculation and Analysis for CFETR Blanket

Preliminary Shielding Analysis for HCCB TBM Transport

The Neutron Calculation of the Chinese Helium Cooled Solid Breeder Test Blanket Module

Preliminary Tritium Transport Analysis for the Water Cooled Ceramic Breeder Blanket System Based on a System Level Code

Blanket design and neutronics analysis for compact tokamak test reactor

Analysis and design of neutronics for an ITER test blanket module

Current Progress of Chinese HCCB TBM Program

Assessment of the Radioactivity Production in Water Coolant System of WCCB for CFETR

Preliminary Neutronics/Thermal-Hydraulics Design and Analyses of the Helium-Cooled Mixed Bed Breeder Blanket for Cfetr under 1.5 Gw Fusion Power

Three-dimensional Thermal-Hydraulics/neutronics Coupling Analysis on the Full-Scale Module of Helium-Cooled Tritium-Breeding Blanket