Abstract:BackgroundChina Dual Functional Lithium-Lead (DFLL) blanket is designed by the Institute of Nuclear Energy Safety Technology, Hefei Institutes of Physical Science, Chinese Academy of Sciences for fusion reactor. Since the designs of fusion reactor tritium breeding blankets are highly depended on neutronics calculation, nuclear data and simulation software used for DFLL cladding design is needed to be verified.PurposeThis study aims to evaluate the feasibility of nuclear data and code in DFLL cladding design by neutronics experiments.MethodsFirst of all, a DFLL mock-up was built and a series of neutronics experiments were performed on the D-T Fusion Neutron Generator. Then, a combination of Nb activated foil with reaction channel 93Nb(n,2n)92mNb and 238U fission chamber was chosen in this experiment for neutron yield measurement and relative neutron source intensity monitoring respectively. The Li2CO3 pellets and activation foils were used to measure the tritium production rates (TPR) and the multi-threshold reaction rates at different depths in the DFLL mock-up respectively. Finally, the measured TPR and reaction rates of the activation foils were compared with Monte Carlo simulation results coupled with JEFF3.2 nuclear data library.ResultsThe comparison results show that measurement uncertainty of neutron source intensity is within 4.2%, and the ratios of calculation results to experimental data (C/E) are 1.0~1.07 on TPRs and 0.77~1.1 on reaction rates.ConclusionsThe obtained results indicate that the tritium breeding ratio in neutronics design can be accurately evaluated.

The Neutron Calculation of the Chinese Helium Cooled Solid Breeder Test Blanket Module

Optimization Arrangement of Neutron Multiplier and Tritium Breeder for the Chinese ITER Solid TBM

Neutronics Analyzation of Helium Cooled Solid Breeder Blanket in a Fusion Reactor

Numerical simulation of the temperature field in the ITER Chinese helium cooled solid breeder test blanket module

Current Progress of Chinese HCCB TBM Program

Optimal Design for Helium Cooled Solid Breeder Blanket of CFETR

Current Design And R&D Progress Of The Chinese Helium Cooled Ceramic Breeder Test Blanket System

Neutronics Design Optimization on Cross Cooled Solid Blanket of Fusion Reactor

Numerical Simulations of the Temperature Field in the Breeding Sub-Module of the ITER Chinese Helium Cooled Solid Breeder Test Blanket Module

Neutronics Comparison Analysis of the Water Cooled Ceramics Breeding Blanket for CFETR

Neutronics Effects of Homogeneous Model on Solid Breeder Blanket of CFETR

Progress on Solid Breeder TBM at SWIP

Tritium Transport Modeling and Analysis for HCCB Blanket of CFETR

Study on Neutronics and Thermo-hydraulics for Mixed Pebble Bed Blanket of Fusion Reactor

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

Investigation on the Tritium Self-Sufficiency and Neutron Shielding Based on a Water-Cooled Blanket for CFETR at 1.5 GW

Neutronic Analysis of a Thorium-Uranium Fueled Water Cooled Fusion-Fission Hybrid Blanket

Preliminary Design of A Solid Particulate Cooled Blanket for the Steady-State Tokamak Reactor (Sstr)

Development and verification of tritium transport code based on RELAP5/MOD3.3 with generic model towards COOL blanket

Neutronics experiments of dual functional lithium-lead blanket based on D-T fusion neutron source

APPLICATION OF MCNP4C IN GAMMA SHIELDING DESIGN OF THE HTR-PM COMPARTMENTS AND ITS COMPARISON WITH QAD-CGA