Neutronics experiments of dual functional lithium-lead blanket based on D-T fusion neutron source

ZENG Zhengkui,CHEN Size,ZHANG Yong,WANG Haixia,XIONG Houhua
DOI: https://doi.org/10.11889/j.0253-3219.2022.hjs.45.040601
2022-01-01
Nuclear Techniques
Abstract:BackgroundChina Dual Functional Lithium-Lead (DFLL) blanket is designed by the Institute of Nuclear Energy Safety Technology, Hefei Institutes of Physical Science, Chinese Academy of Sciences for fusion reactor. Since the designs of fusion reactor tritium breeding blankets are highly depended on neutronics calculation, nuclear data and simulation software used for DFLL cladding design is needed to be verified.PurposeThis study aims to evaluate the feasibility of nuclear data and code in DFLL cladding design by neutronics experiments.MethodsFirst of all, a DFLL mock-up was built and a series of neutronics experiments were performed on the D-T Fusion Neutron Generator. Then, a combination of Nb activated foil with reaction channel 93Nb(n,2n)92mNb and 238U fission chamber was chosen in this experiment for neutron yield measurement and relative neutron source intensity monitoring respectively. The Li2CO3 pellets and activation foils were used to measure the tritium production rates (TPR) and the multi-threshold reaction rates at different depths in the DFLL mock-up respectively. Finally, the measured TPR and reaction rates of the activation foils were compared with Monte Carlo simulation results coupled with JEFF3.2 nuclear data library.ResultsThe comparison results show that measurement uncertainty of neutron source intensity is within 4.2%, and the ratios of calculation results to experimental data (C/E) are 1.0~1.07 on TPRs and 0.77~1.1 on reaction rates.ConclusionsThe obtained results indicate that the tritium breeding ratio in neutronics design can be accurately evaluated.
What problem does this paper attempt to address?