Abstract:Based on operation state analysis and energy balanceEnergy balance testing of more than 300 aluminum electrolysisAluminum electrolysis cells in the recent five years, the energy balance characteristics of cells in China was studied. It was shown that the operation state of the aluminum electrolysis cell determined the heat dissipationHeat dissipation. A cell with a good operation state had low energy consumption, the total heat dissipation was relatively small, and energy utilization efficiencyEnergy utilization efficiency was high. For a cell with a good operation state, the regional heat dissipation distribution was good. The excess voltage needed due to the total heat dissipation of a good operating cell was below 1.72 V, and energy utilization efficiencyEnergy utilization efficiency reached above 50%. The regional heat dissipation distribution of a medium performing operation state cell was fairly good, the total heat dissipation voltage was between 1.72–1.82 V, and energy utilization efficiency was 49–50%. Cells with poor operation state generally had a large heat dissipation zone, and the total heat dissipation voltage reached above 1.82 V and energy utilization efficiency was below 49%. This research can provide reference values for energy consumption evaluation of aluminum electrolysisAluminum electrolysis cells and further reduce energy consumption.

The development of 85kA three-layer electrolysis cell for refining of aluminium

Development and application of integrated technology of current-intensifying and high-efficiency energy-saving for aluminium reduction

The analog simulation of three-layer electrolysis cell for refining of aluminum

Relationship Between Aluminium Electrolysis Current Efficiency and Operating Condition in Electrolyte Containing High Concentration of Li and K

Pilot experiments of low temperature (700 ~ 800°C) aluminum electrolysis in A 5KA Caluminum reduction cell

The Status and Development of Three - Layer Aluminum Electrolysis Technology in China

Technology Research on Decreasing the Aluminum Surface Waves and Reducing the Cathode Voltage Drop in Aluminum Electrolysis Cell

Development and Application of New Dry Barrier Powder Refractory for Aluminum Electrolysis Cell

Design and Production Practice of Curved Cathode 300 Ka Cell

Application of Full Heat Insulation Lining in 300 Ka Aluminum Electrolysis Cells

Experimental Aluminum Reduction Cell with Suspended Cathode and Finite Element Analysis of Its Current Field

PILOT EXPERIMENTS OF LOW TEMPERATURE (700 similar to 800 degrees C) ALUMINUM ELECTROLYSIS IN A 5KA ALUMINUM REDUCTION CELL

Separation of Aluminum from More Noble Elements in an Electrolysis Cell with Side-by-Side Geometry

Energy Balance of the Chinese Aluminum Electrolysis Cell

Analysis of 3D Thermo - Electric Field Potential for 300 Ka Aluminum Electrolysis Cell Using ANSYS

A new process of alumina suspension electrolysis

Horizontal Electrorefining of Al in Na3alf6-Lif Molten Salt

An Inhomogeneous Three-Phase Model for the Flow in Aluminium Reduction Cells

3D Thermo-electric of 160 Ka Prebaked AluminumReduction Cell at Low Cryolitic Ratio and Temperature

Industrial test of low-voltage energy-saving aluminum reduction technology

Improved CFD Modeling of the Whole-Cell Side Ledge Behavior in Aluminum Electrolysis Cell