Abstract:Based on operation state analysis and energy balanceEnergy balance testing of more than 300 aluminum electrolysisAluminum electrolysis cells in the recent five years, the energy balance characteristics of cells in China was studied. It was shown that the operation state of the aluminum electrolysis cell determined the heat dissipationHeat dissipation. A cell with a good operation state had low energy consumption, the total heat dissipation was relatively small, and energy utilization efficiencyEnergy utilization efficiency was high. For a cell with a good operation state, the regional heat dissipation distribution was good. The excess voltage needed due to the total heat dissipation of a good operating cell was below 1.72 V, and energy utilization efficiencyEnergy utilization efficiency reached above 50%. The regional heat dissipation distribution of a medium performing operation state cell was fairly good, the total heat dissipation voltage was between 1.72–1.82 V, and energy utilization efficiency was 49–50%. Cells with poor operation state generally had a large heat dissipation zone, and the total heat dissipation voltage reached above 1.82 V and energy utilization efficiency was below 49%. This research can provide reference values for energy consumption evaluation of aluminum electrolysisAluminum electrolysis cells and further reduce energy consumption.

Design and Production Practice of Curved Cathode 300 Ka Cell

Technology Research on Decreasing the Aluminum Surface Waves and Reducing the Cathode Voltage Drop in Aluminum Electrolysis Cell

Experimental Aluminum Reduction Cell with Suspended Cathode and Finite Element Analysis of Its Current Field

The development of 85kA three-layer electrolysis cell for refining of aluminium

Analysis of 3D Thermo - Electric Field Potential for 300 Ka Aluminum Electrolysis Cell Using ANSYS

Electric Field Distribution in 75 Ka Drained Aluminum Reduction Cell

Simulation of strong coupling electromagnetic current in aluminum reduction cells and its application in new cathodes

Simulation and Analysis of Magnetic Fields and Flow Fields of Metal Pad in 75 Ka Drained Style Aluminum Reduction Cell

A Numerical Simulation to Thermal Field and Stress Field of Aluminum Cell Cathode and Anode

Improved CFD Modeling of the Whole-Cell Side Ledge Behavior in Aluminum Electrolysis Cell

Optimization Analysis of High Current Rare Earth Electrolytic Cell

Magnetic Field Simulation and Design of Stationary Stream Pattern Aluminum Reduction Cell

Numerical Simulation Study on Gas Collecting System of 400 kA Grade Aluminum Electrolytic Cell

Optimization of Liner Structure in Large-Scale Pre-Baked Aluminum Reduction Cell

Mode Coupling Analysis of Interfacial Stability and Critical Anode–Cathode Distance in a 500-kA Aluminum Electrolysis Cell

Simulation Calculation of 3D Freeze Profile in Prebaked Aluminum Reduction Cells

2D Finite Element Analysis of Thermal Balance for Drained Aluminum Reduction Cells

Pilot experiments of low temperature (700 ~ 800°C) aluminum electrolysis in A 5KA Caluminum reduction cell

Fully-Coupled Electric-Thermal-Flow Modeling and Investigation of Dynamic Thermal-Ledge Behavior in Aluminum Electrolysis Cell

Modeling and application for calculation of electric-thermal balance in a drained aluminium reduction cell

Energy Balance of the Chinese Aluminum Electrolysis Cell