Numerical investigations on electrolytic performance of proton exchange membrane electrolysis cell with parallel flow field
Junjie Zhou,Wanyuan Niu,Yunjin Ao,Yinsheng Yu
DOI: https://doi.org/10.1016/j.applthermaleng.2024.124164
IF: 6.4
2024-08-19
Applied Thermal Engineering
Abstract:In this study, a three-dimensional simulation model of PEMEC with parallel flow field was established, the heat and mass transfer, electrochemical reactions were described to investigate the electrolytic performance. The distribution characteristics of temperature, liquid water and gas products in the electrolysis cell were obtained. The results show that during the operation of PEMEC system, the liquid water content decreases sequentially along the flow channel direction, while there is a significant temperature gradient in the flow direction of the electrolysis cell. The increase of the initial temperature can increase the current density of the electrolytic cell when the temperature increases from 60 °C to 80 °C, the current density can be increases by 7.86 %, but it can also lead to the dehydration of PEMEC, resulting in thermal degradation of PEMEC, and further the reactivity and proton transfer performance were decreased. It is also found that the increase of liquid water inlet flow not only increased the reactant concentration, accelerated the chemical reaction rate, but also took away more heat generated by ohmic polarization as a coolant, which was conducive to the improvement of electrolytic performance. As the inlet flow rate increased from 1 mL/s to 3 mL/s, the current density at 2.4 V and 1.4 V can be increased by 3.66 % and 1.77 %, respectively, and the maximum temperature can be reduced by 7.4 K.
energy & fuels,engineering, mechanical,thermodynamics,mechanics